----------------------------------------------------------------------------------
Start of: NxCheckBox V2.0.2.41 (NX CR2212) <Build: > at Thu Jun 27 10:25:55 2024

 (c) 2009, 2010, 2011, 2012, 2013, 2014 Siemens Product Lifecycle Management Software (DE) GmbH
----------------------------------------------------------------------------------

... Reading 1 arguments
Info: Too few arguments for nxcheckbox

-----------------------------------------------------------------------------------------------------------------------
Usage for Check Actions:
------
nxcheckbox ...
-partList=<partlist>
-part=<partname>
-outdir=<outputdir>

[-log=<logfile>]
[-result=<resultfile>]
[-pim=yes]
[-u=<username> -p=<password> -g=<6]>]
[-TC_revision_rule_name=<revision Rule Name>
[-Action=<action1,...,action_n>]    example: -Action=ModelGetData,AssemblyGetData,DrawingGetData   (default: all Checks)
[-DetailOption=<All|{2,3,4,5,6,7,8,...}>
[-MaxAssemblyLevel=<-1|0|1|2|3|4|5|6|7|8,...}>  (default: all Levels) (-1=all Levels) Example: 2 means until level 2
[-UpdateAllFeatures]                --> feature replay
[-UpdateViaFeatureReplay]           --> set first feature and last feature
[-StruktureSync]                    --> assembly structure refresh
[-UpdateAllViews]                   --> update of drawing views
[-Sheet=<sheet1,...,sheetn>]        example: -Sheet=SHT1,SHT2  (default: all sheets, with view) keys: _All_,_with_view_
[-ExtractCGM_toDir=<dirname>]       example: -ExtractCGM_toDir=V:\cgm_dir
[-DrawingSnapShotCreate]            --> create CGM snapshots of all drawings (NX7.5ff) after update funcitons and with -SaveWorkPart Option
[-SaveWorkPart]                     --> Saves the workpart after checking
[-Accuracy=<accuracy>               --> Accuracy Value for Body mass property calculation (Default is .99
[-Cgm_Def_Color_Option={-1,0,1,2,3,4,5}]
                       -1: old CGM function (default)
                        0: UF_PLOT_AS_DISPLAYED_COLORS
                        1: UF_PLOT_PART_COLORS
                        2: UF_PLOT_CUSTOM_PALETTE_COLORS
                        3: UF_PLOT_BLACK_ON_WHITE
                        4: UF_PLOT_LEGACY_COLORS
                        5: UF_PLOT_COLOR_BY_WIDTH

Example: nxcheckbox -log=c:\temp\mylog.txt  -outdir=c:\temp\refile -partList=r:\partlist.txt
Example: nxcheckbox -pim=yes -u=myaccount -p=mypassword -log=D:\mylog.txt  -outdir=X:\myldir  -partList=r:\partlist.txt
Example: nxcheckbox -pim=yes -u=mya -p=myp -log=D:\log.txt -partList=r:\list.txt -ExtractCGM_toDir=r:\cgm_dir -Sheet=_All_,_with_view_
Example: nxcheckbox -Cgm_Def_Color_Option=3 -log=r:\mylog.txt  -ExtractCGM_toDir=r:\cgm_dir -partList=r:\partlist.txt
Example: nxcheckbox -log=c:\temp\mylog.txt  -outdir=c:\temp\refile -partList=r:\partlist.txt -SaveWorkPart -DrawingSnapShotCreate  -UpdateAllViews -UpdateAllFeatures
-----------------------------------------------------------------------------------------------------------------------

=======================================================================================================================

-----------------------------------------------------------------------------------------------------------------------
Usage for CGM import:
------
nxcheckbox ...
-Action=CgmImportToNXPartFile
-PartTemplate=<template partname> --> must exist
-CgmtoPartFile=<new partname>     --> new
-Cgm1_File=<1st cgm file>         --> must exist
-Cgm2_File=<2nd cgm file>         --> must exist

[-Cgm1_Layer=<Layer for 1st Cgm import file>]         (Value:{1-256}   default=1)
[-Cgm2_Layer=<Layer for 2nd Cgm import file>]         (Value:{1-256}   default=2)
[-Cgm1_Color=<Color for 1st Cgm import file>]         (Value:{1-256}   default=1)
[-Cgm2_Color=<Color for 2nd Cgm import file>]         (Value:{1-256}   default=5)
[-Cgm2_xOffset=<X-Offset for 2nd Cgm import file>]    (default=0.050)
[-Cgm2_yOffset=<Y-Offset for 2nd Cgm import file>]    (default=0.025)
-log=<logfile>

Example: NxCheckBox.exe -Action=CgmImportToNXPartFile -cgm1_Layer=1 -Cgm2_Layer=2 -Cgm2_xOffset=0.05 -Cgm2_yOffset=0.025 -Cgm1_Color=1 -Cgm2_Color=5 -CgmtoPartFile=D:\p4711_SHT1_diff.prt -PartTemplate=D:\cgm_template.prt -Cgm1_File=D:\nx4_results\p4711_SHT1.cgm  -Cgm2_File=D:\nx6_results\p4711_SHT1.cgm -log=D:\cgm_diff.log
-----------------------------------------------------------------------------------------------------------------------