#New: 14.08.2018/J.Fes #Doc: Options form Version: NX 12.0.2.9 MP1, 02Aug18. See Maintenance Pack letter for detailed list of fixes. ------------------------------------------------------------------------------------------------------------- Part Utility with -managed_mode=yes options are: ------------------------------------------------------------------------------------------------------------- Login Options: -------------- -u[ser]= To specify Teamcenter user name -g[roup]= To specify Teamcenter group name -p[assword] To specify Teamcenter password -pf= File to specify the Teamcenter password Input Part Options: ------------------- -part= Specification of single part to process. Part name should be in the @DB/ / format, where Part Identifier is fnd0partIdentifier property on Item -i[nput_list]= List of specifications of input parts. Part name should be in the @DB// format, where Part Identifier is fnd0partIdentifier property on Item -f[older]= Name of folder listing input parts -folder_user= Name of user whose folder to use -resume Line number of input list to start processing from Functional Options: ------------------- -d[rawings]= Update drawings -structure_sync Synchronize structures between NX and Teamcenter. Default = -transforms_source Source of transforms if different from -structure_sync argument.Default = -sync_arrangements= Synchronize arrangement data if consistent with other structure sync settings.Default -cleanu[p]= Perform part cleanup before operation. Default -anon[ymize]= Removes user and program version strings from part history. Default -force_read_jt Force to read from a JT dataset even if a master dataset exists -convert_mcs= Convert mating conditions to assembly constraints and output report -regen_lw Force all lightweight bodies in the specified part to be regenerated. By default the faceting parameters previously used to create each body will be used again.This option is now being done by default for parts saved before NX7.5. -regen_lw_def_tol Similar to regen_lw however this flag will not use the faceting parameters on the existing body but the default faceting parameters will be utilized instead. -remap_drawing_callouts Remap the callout references in drawing to = -synchronize_callout_to_teamcenter= Update the Find No.in Teamcenter based on the CALLOUT value on the NX part occurrences -convert_units_to_mm Convert the part from inches to millimeters -convert_units_to_in Convert the part from millimeters to inches -convert_line_widths Converts all legacy line width in the specified parts to use new line widths. Conversion is done based on the Legacy Line Width Conversion part preference. -recreate[_missing_stock_components] For Routing assemblies, re-creates any missing stock as component components -create_drawing_snapshot Creates snapshot data of the part for its drawings -generate_trueshape= Generate True Shape occupancy data. Default -record_part_data= Record part data (bounding box & mass properties as well as properties to allow Active Workspace to filter search results based on part / assembly / drawing, interpart links, product interfaces, user defined features, reference components, suppressed components, constraints, arrangements, geometry overrides, position overrides, and parts list).Default -record_altrep_notes= Record AltRep occurrence notes. Default -h[elp] Produces this message Add-On Options: --------------- -non[_masters]= Automatically process non-master parts.Default -bypass= Use bypass privilege if necessary. Default -update_mod[_props]= Update last modifying user/date on dataset -k[eep_volume]= Use original volume for output parts. Default -set_new_dataset_o[wner] Sets the ownership of new datasets to be either that of the owning item - rev or multi - CAD jt dataset -allow_released= Process parts with release status. Default -force_structure_sync= Force synchronize structures as requested by - structure_sync.Default -allow_null_transform Used with -structure_sync used with -structure_sync=from_teamcenter and -transforms_source = from_teamcenter to allow transforms from Teamcenter to be null -read_mapped_attri[butes]= Read mapped attributes if consistent with other structure sync settings.Default -compression= Compresses|uncompresses the part(s) -y Fully load components that are not at the current version of NX -force_operate Used with the -y switch to force all components to be operated on -mc_parts_only Used in conjunction with convert_mcs to specify only convert parts which contain mating conditions -mc_dry_run Used in conjunction with convert_mcs to do the mating condition conversion and generate the conversion report without saving any parts. -mc_dont_load_referenced_geometry Used in conjunction with convert_mcs to not load geometry referenced by the mating conditions being converted. Note this will bypass constraint conversion checking. -debug= Print debug information. Default -use_default_load_option_file Uses specified default load options. This cannot be used along with - y option, -y option takes precedence if set -specified_non_master_only Used with -input_list option to process Only specified non - master while processing the non - master parts from the input list -env Specify customer environment -out[put_file]= File to write failure information to -log[_file]= File to write log information to in case of failure = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = Options getting used during this Part Utility operation are: 11.11.2019 managed_mode = TRUE update_appdata_props = FALSE version_appdata = TRUE preserve_volume = TRUE structure_sync = FALSE sync_from_ug= TRUE force_structure_sync= FALSE bypass = TRUE operate_on_non_masters = TRUE resume_line_number = 1 allow_released = TRUE generate_trushape = FALSE record_part_data = FALSE record_altrep_notes = FALSE transforms_source = FALSE transforms_from_ug = TRUE compress_part = FALSE uncompress_part = FALSE input_source = 2 load_all_comps = FALSE force_operate_on_all_comps = FALSE sync_arrangements = FALSE read_mapped_attributes = TRUE repair_drawings = FALSE update_drawings = FALSE do_part_cleanup = FALSE fix_prev16_aligns_log = -1 anonymize_part_history = FALSE allow_null_transforms = FALSE new_dataset_ownership = FALSE replica_bypass = FALSE force_read_jt = FALSE convert_mcs = -1 mc_parts_only = FALSE mc_dry_run = FALSE mc_load_ref_geom = TRUE refacet_jt_bodies = FALSE refacet_jt_bodies_use_default_tols = FALSE remap_drawing_callouts = FALSE synchronize_callout_to_teamcenter = FALSE force_skip_one_level = FALSE replace_file = FALSE debug = TRUE convert_units_to_mm = FALSE convert_units_to_in = FALSE inspect = FALSE allow_spreadsheets_for_units_conversion = FALSE recreate_missing_stock_components = FALSE convert_line_widths = FALSE create_drawing_snapshot = FALSE use_default_load_option_file = TRUE specified_non_master_only = FALSE regen_minimal_load = FALSE