PLMJobManager Versions Info: [(c) Dipl.Ing. J.Feuerstein 2005..2015] -------------------------------------------------------------------- Version Full.....: 2.12220.2212.2015 Version Number...: 12220 Release Date/Time: 23.12.2015 10:46 Release by.......: Josef Feuerstein === 18.12.2015 ============================================================================ - Version........: 2.1221 // J.Fes - Categorie......: JCT - Type...........: Change: - Description....: IrInfoResolve_2011_06 Enhanced Now we support #BOMview Info and #BOMviewRevision Info === 16.12.2015 ============================================================================ - Version........: 2.1221 // J.Fes - Categorie......: Install and Setup Settings - Additional Info: Check.Settings - Type...........: Change: - Description....: Commandline parameter renamed from TCEGroup to TCGroup from TCEGroup to TCGroup === 14.12.2015 ============================================================================ - Version........: 2.1221 // S.Gueth - Categorie......: Settings JCT - Additional Info: Check.Settings - Type...........: New: - Issue..........: JobMgr.Issue-2440 - Description....: SubAction 'NXJournalExecute' for Action 'NxDataProcessing_2013_09' to execute an journal for NX for more info please have a look into the cmd tools docu of 'NxDataProcessing_2013_09' === 11.12.2015 ============================================================================ - Version........: 2.1221 // S.Gueth - Categorie......: Settings JCT - Additional Info: Check.Settings - Type...........: New: - Description....: DataShare - and DataShareEval processes can now be executed only for ItemRevisions just set the variable 'ObjectClass' in the TcSiteCons.cmd job script to 'ItemRevision' (default is 'Item') example: set ObjectClass=ItemRevision === 04.12.2015 ============================================================================ - Version........: 2.1221 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Type...........: Change: - Description....: JobControl sort order based on Dataset Types improved If JobRoule includes Datasets of IRs then order of: NX Datasets are: - UGMASTER - UGALTREP - UGMANIFESTATION - UGPART - all other NonMaster DataSet Types like UGSCENARIO..CAEGEOM..NXMotin ... IDEAS Datasets are: - IdeasPart - IdeasAssemblUGPART - IdeasDrawing ProE Datasets are: - ProPrt - ProAsm - ProDrw Catia Datasets are: - CATPart - CATProduct - CATDrawing === 25.11.2015 ============================================================================ - Version........: 2.1221 // J.Fes - Categorie......: Import Sites/Data Import - Additional Info: Ver.Info - Type...........: Doc: - Description....: ItemId search supoort now wildcards If searching value of ItemIds contains wildards then all Items and Irs are listed. for example you are able to import all Items and IR's via 4700* === 25.11.2015 ============================================================================ - Version........: 2.1221 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Type...........: Change: - Description....: Refile Option dialog enhanced - refile options now orgeniced by captures. - Captures are show with 'gold' BackColor - NX10 refile options added - Filter in options are posible === 24.11.2015 ============================================================================ - Version........: 2.1220 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Type...........: New: - Description....: JobControl Object selection methodes enhanced Now you can select all Data of Item via new Option ALL_of_ITEM See: JobContol Rules sel:O.Special === 24.11.2015 ============================================================================ - Version........: 2.1220 // J.Fes - Categorie......: ObjectList - Additional Info: Ver.Info - Type...........: Change: - Description....: Behavior changed in Ed.P.State for Process Group P.Rf Now Status is set only to Objects that is the edit targets. Behavior bevore was that UGMaster dataset of IR did changed the P.State in Process Group P.Rf. === 23.11.2015 ============================================================================ - Version........: 2.1220 // J.Fes - Categorie......: JCT - Additional Info: Ver.Info - Type...........: Change: - Description....: BOMCompair did searched for wrong matching cooresponding BOMLine. Now corresponding BOM Line is searchd by BOMLine.puid Issue is solved by code changes === 19.11.2015 ============================================================================ - Version........: 2.1220 // A.Becker - Categorie......: ObjectJobResults - Additional Info: UpdDb=No - Type...........: New: - Description....: JobLog Link can be direct opened from a 7-Zip file. === 16.11.2015 ============================================================================ - Version........: 2.1220 // J.Fes - Categorie......: JobControl Settings - Additional Info: Check.Settings - Type...........: New: - Description....: New Option to control how JobData handelt if a ne Job is created. see: -> Edit JobControl Rule |-> Job Definitionen Extended |-> 3 Job Managment Extendet |-> 1 New Job Process Data Handel (Default is AddEdit2JobNew) === 10.11.2015 ============================================================================ - Version........: 2.1219 // A.Becker - Additional Info: UpdDb=No - Type...........: New: - Description....: JobClient writes log informations to %temp%\JobClient\JobClient.log (Levels info/warning/error/fatal). Fatal unhandled exceptions are logged to %temp%\JobClient_UnhandledException.log (But they should normally never occour). === 09.11.2015 ============================================================================ - Version........: 2.1219 // S.Gueth - Categorie......: JCT - Type...........: New: - Description....: If there was no Refile Result found and no result from the nx syslog, then the process monitor log will be parsed This result will be written in the refile result message, Example: Result Message: [Rf:ERR:PM Terminated:none of the monitored files was written to within 600 sec.] Result Code is: JM-999070 === 07.11.2015 ============================================================================ - Version........: 2.1219 // J.Fes - Categorie......: GUI - Additional Info: Ver.Info - Type...........: Change: - Description....: Outputformat of Exception messages optimiced - Output with is minimiced - Useless SourceCode pathes removed - Stack trace contains numers in front of message === 07.11.2015 ============================================================================ - Version........: 2.1219 // J.Fes - Categorie......: DB Import Sites/Data Import - Additional Info: Ver.Info - Type...........: New: - Description....: Sync.Site.Data compairs now also ExportRecorde ExportRecordeData If TC.DB and JM.DB Export Recordes differs then Data will updatet === 07.11.2015 ============================================================================ - Version........: 2.1219 // J.Fes - Categorie......: DB Import Sites/Data Import - Additional Info: Ver.Info - Type...........: New: - Description....: Sync.Site.Data new Sync Methodes avilable Sync.Site.Data has now 3 Options to Sync Data between JM.DB and TC - 1: Sync.Site.Data [Items Only] - 2: Sync.Site.Data [Ir Only] - 3: Sync.Site.Data [Items/Ir + Import.Site.Data] (Default) === 07.11.2015 ============================================================================ - Version........: 2.1219 // J.Fes - Categorie......: ObjectList - Type...........: Change: - Description....: During edit Process Status JobServer returns ERROR: Column 'ProcStateCol01' is read only. Issue is now solved by code changes in JobServer === 06.11.2015 ============================================================================ - Version........: 2.1219 // S.Gueth - Categorie......: GUI - Type...........: New: - Description....: In the column J.last Info of the table JobComputer Computers in the JobServer you will now see the current system load of the client (CPU utilization, memory usage, free disc space state) if there is a warning or an error this column cell will get the coresponding background color: Sys load: OK --> green Sys load: WRN --> cyan Sys load: ERR --> red === 05.11.2015 ============================================================================ - Version........: 2.1219 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Type...........: Change: - Description....: New behavior during creating Jobs. To reduce times for creating new Jobs we do create pre JobResults in this phase anymore. Only Objects P.Status is changed. Hint: JobResults will be createt to JobMgr Database when JobResults returns from JobClients. === 05.11.2015 ============================================================================ - Version........: 2.1219 // A.Becker - Categorie......: Import ObjectJobResults - Additional Info: UpdDb=No - Type...........: New: - Issue..........: JobMgr.Issue-2411 - Description....: Implemented 7-Zip compression for job archive packages. For optimized archive size choose SevenZip implementation with Highest compression level. Important: 7-Zip will be used as default from now on. If you need ZIP archives, you have to change the compression settings. === 21.10.2015 ============================================================================ - Version........: 2.1219 // J.Fes - Categorie......: JCT - Additional Info: Ver.Info - Type...........: Change: - Description....: If Result Classification Custom rues are used (via: -ResultClassificationCustom_DPNE ..) and one of the Results are interpreted as a Warning Objects.P.Res.Has.WRN is set to true === 16.10.2015 ============================================================================ - Version........: 2.1218 // A.Becker - Categorie......: GUI - Type...........: New: - Description....: When you press the reset filter button while holding the shift button, all filters we be resetted (including object id and object group field) === 14.10.2015 ============================================================================ - Version........: 2.1218 // J.Fes - Categorie......: Settings CheckBox - Additional Info: Check.Settings - Type...........: Change: - Description....: Property 'MD.Volume Deviation Percentage Result Rules' Update of default values to: OK.....: 0,000% - 0,005% WRN....: 0,005% - 0,050% ERR....: 0,050% - .... === 06.10.2015 ============================================================================ - Version........: 2.1218 // J.Fes - Categorie......: DB Import Sites/Data Import - Additional Info: Ver.Info - Type...........: Change: - Description....: Issue.: Sync.Site Data process stopt because of SQL CommandTimeout's during reading ItemData form TC.DB Change: Now SQL command is using Site defined 'Command Time Out settings [sec]' === 05.10.2015 ============================================================================ - Version........: 2.1217 // S.Gueth - Categorie......: JobControl Settings - Additional Info: Check.Settings - Type...........: New: - Description....: JobClient - JobServer checks now if the CPU utilization of JobClient is not to high. If the CPU utilization is to high, JobClient recives !! -NO new Job- !! Message is shown in JobClient and in JobServer See also settings in JobServer Settings === 05.10.2015 ============================================================================ - Version........: 2.1217 // S.Gueth - Categorie......: JobControl Settings - Additional Info: Check.Settings - Type...........: New: - Description....: JobClient - JobServer checks now if the Memory usage of JobClient is not to high. If the Memory usage is to high, JobClient recives !! -NO new Job- !! Message is shown in JobClient and in JobServer See also settings in JobServer Settings === 05.10.2015 ============================================================================ - Version........: 2.1217 // J.Fes - Categorie......: DB Import Sites/Data Import - Additional Info: Ver.Info - Type...........: Change: - Description....: On 'Sync.Site.Data' did not delete non existing ITEM Data from JobMgr.DB Issue are solved by code changes. === 21.09.2015 ============================================================================ - Version........: 2.1217 // J.Fes - Categorie......: ObjectList - Additional Info: Ver.Info - Type...........: New: - Description....: Edit Process status: Supports now selection of data via 'Grid-Cells'. This enhancment improves selection of data to edit the process status. === 16.09.2015 ============================================================================ - Version........: 2.1217 // J.Fes - Categorie......: Import Sites/Data Import - Additional Info: UpdDb=Yes - Type...........: New: - Description....: OwingGroups supports now SubGroups === 02.09.2015 ============================================================================ - Version........: 2.1217 // A.Becker - Categorie......: ObjectList - Additional Info: UpdDb=No - Type...........: New: - Description....: The column chooser of the data grid can be filtered. === 02.09.2015 ============================================================================ - Version........: 2.1217 // A.Becker - Categorie......: ObjectList - Additional Info: UpdDb=No - Type...........: New: - Description....: Object list can be populated from selected controls. The object list editor provides new functions to modify elements. === 28.08.2015 ============================================================================ - Version........: 2.1217 // S.Gueth - Categorie......: Settings JCT - Additional Info: Check.Settings - Type...........: New: - Issue..........: JobMgr.Issue-2396 - Description....: Enhancement of DataShare Eval Prozess you can now define DataSet relation Exclude Lists and DataSet Type Exclude Lists these lists will be defined via the new ActionSettings_cls in the cmd tools a file with the name #Action#_Settings.xml has to be in the JobRoot_DP === 27.08.2015 ============================================================================ - Version........: 2.1217 // A.Becker - Categorie......: GUI ObjectList - Additional Info: UpdDb=No - Type...........: Change: - Description....: The Search-and-List process is partly moved to background. While the database query runs, the process can be cancelled by the user. === 27.08.2015 ============================================================================ - Version........: 2.1217 // A.Becker - Categorie......: ObjectList - Additional Info: UpdDb=Yes - Type...........: New: - Description....: The new ObjectGrouping feature allows to remember and select sets of objects using custom groups. === 27.08.2015 ============================================================================ - Version........: 2.1217 // A.Becker - Categorie......: ObjectList - Additional Info: UpdDb=Yes - Type...........: Change: - Description....: The Performance of object listing via InputLists is highly improved now. === 21.08.2015 ============================================================================ - Version........: 2.1217 // S.Gueth - Categorie......: JobControl Scripting Settings - Type...........: New: - Description....: JobClient can start PowerShell script files (*.ps1) directly === 10.08.2015 ============================================================================ - Version........: 2.1216 // S.Gueth - Categorie......: JobControl - Type...........: New: - Issue..........: JobMgr.Issue-2349 - Description....: Enhancement: Improving performance to generate faster Job's Therefor a extension ist programmed that commit of 'JobResults' is now running in a extra thread. The thread is running parallel to the JobControl Services and improves the generation of new Job's. === 07.08.2015 ============================================================================ - Version........: 2.1216 // S.Gueth - Categorie......: Settings JCT - Additional Info: Check.Settings - Type...........: New: - Description....: Parameter ExecuteMacroViaUGRouter in Action NxDataProcessing_2013_09_02, Subaction NXMacroExecute defines if the macro should be executed via UGRouter.exe NX will be closed on start when it was allready open NX has to be started new each time via UGRouter exe to execute the macro === 03.08.2015 ============================================================================ - Version........: 2.1216 // J.Fes - Categorie......: DB JCT - Additional Info: Ver.Info - Type...........: New: - Description....: Refile of Datasets (JobMgr_RfDataSets=ON) extendet. Now Refile 'Error explanation: Text is now parst from Rf.log file. P.ResCode = Rf-DS P.Res.Msg = Text after 'Error explanation: #Example Data of Rf.log files: Failed to refile @DB/4711/A/specification/4711-A. Error explanation: The dataset has a newer version in Teamcenter than in this session ** Refiling Complete ** Value of result Message P.Res.Msg = [Rf.ERR:The dataset has a newer version in Teamcenter than in this session] === 27.07.2015 ============================================================================ - Version........: 2.1216 // S.Gueth - Categorie......: JCT CheckBox - Type...........: New: - Description....: added clean up of JobTemp for extracted CheckBox files (will now clean up all *.xml, *.cgm, *.prt files in JobTemp folder) === 16.07.2015 ============================================================================ - Version........: 2.1215 // J.Fes - Categorie......: ObjectList - Type...........: Change: - Description....: DataColume in DataGrid renamed from: O.Type(SP/AP) to..: O.SP/AP/NP === 13.07.2015 ============================================================================ - Version........: 2.1215 // J.Fes - Categorie......: GUI ObjectList - Additional Info: Ver.Info - Type...........: New: - Description....: New DataSetType: NXMotion add to JS.GUI === 13.07.2015 ============================================================================ - Version........: 2.1215 // J.Fes - Categorie......: DB Settings - Additional Info: Ver.Info - Type...........: New: - Description....: New Function in JobServer: Create quick a full backup of JobMgr.DB. See: Extra->Setup->Setup database->database maintain->25 - Create a new backup of JobMgr.DB Note: Function will only be executed on JobMgr-SQL Server. === 02.07.2015 ============================================================================ - Version........: 2.1215 // S.Gueth - Categorie......: Settings CheckBox - Additional Info: Check.Settings - Type...........: Change: - Issue..........: JobMgr.Issue-2389 - Description....: Changed default values for MD.Volume Deviation Result Rules in CB Settings from cm^3 to mm^3 OK: 0,000 mm^3 - 0,001 mm^3 WRN: 0,001 mm^3 - 0,010 mm^3 ERR: 0,010 mm^3 - ... === 02.07.2015 ============================================================================ - Version........: 2.1215 // S.Gueth - Categorie......: Settings CheckBox - Additional Info: Check.Settings - Type...........: Change: - Issue..........: JobMgr.Issue-2389 - Description....: The MD.Volume values will now be converted from unit cm^3 to unit mm^3 Hint: The values are not changed in CB.xml files. The values are there still in unit cm^3 === 24.06.2015 ============================================================================ - Version........: 2.1215 // J.Fes - Categorie......: JCT - Additional Info: Ver.Info - Type...........: New: - Issue..........: JobMgr.Issue-1182 - Description....: Refile evaluation support's now also motion part's === 24.06.2015 ============================================================================ - Version........: 2.1215 // S.Gueth - Categorie......: Settings JCT - Additional Info: Check.Settings - Type...........: Change: - Issue..........: JobMgr.Issue-2386 - Description....: Enhanced generation of input file for 'DataShare', 'DataSync' and 'FlipTheSwitch' process IMPORTAND: in Action 'TcMultiSite_2012_02' and Subaction 'DataSync|DataShare|FlipTheSwitch' the parameters 'DataSync_ItemList_DPNE|DataShare_IRList_DPNE|FlipTheSwitch_IRList_DPNE' changed to 'InputList_DPNE' please check this in your script new parameters: 'ClassOutType' : defines for which type the input list should be exported, default: I (Item) 'ClassOutContent' : defines which content should be exported to the input list, default: ID === 19.06.2015 ============================================================================ - Version........: 2.1215 // S.Gueth - Categorie......: Install and Setup Settings - Additional Info: Check.Settings - Type...........: New: - Description....: It is possible now to set a password in the JobManagerUpdate program to decrypt password protected zip files Just open JobManagerUpdate.exe > Setup > Settings > Zip File Settings and edit Password === 19.06.2015 ============================================================================ - Version........: 2.1215 // S.Gueth - Categorie......: Install and Setup - Type...........: Doc: - Description....: With Version 1.0.1.7 the JobManagerUpdate program can be updated by itself === 17.06.2015 ============================================================================ - Version........: 2.1214 // S.Gueth - Categorie......: Settings CheckBox - Type...........: New: - Issue..........: JobMgr.Issue-2383 - Description....: added EN.Text Mappers in CheckBox Settings defines Text mappings for all entities if the text contains the string of 'Text 1' or 'Text 2' then it will be replaced with the string of 'Map Alias' === 17.06.2015 ============================================================================ - Version........: 2.1214 // S.Gueth - Categorie......: Settings CheckBox - Type...........: New: - Issue..........: JobMgr.Issue-2383 - Description....: added EN.ViewDependent Mappers in CheckBox Settings defines ViewDependent mappings for all entities if the ViewDependent name contains the string of 'Text 1' or 'Text 2' then it will be replaced with the string of 'Map Alias' === 16.06.2015 ============================================================================ - Version........: 2.1214 // J.Fes - Categorie......: Import Sites/Data Import - Additional Info: Ver.Info - Description....: SQL to analyse Presice BOMS are updated Now we using in 'BOMc_Precise.SQL' Script infodba.PSTRUCTURE_REVISIONS With this change we are able to read also BOM's that missing infodba.POM_BACKPOINTER releations. === 09.06.2015 ============================================================================ - Version........: 2.1213 // J.Fes - Categorie......: Import Sites/Data Import Settings - Additional Info: UpdDb=Yes Check.Settings - Type...........: New: - Description....: Object data contains now for ItemRevision (IR) and Dataset (DS) data new columes: 'Ir.Rank' - Ir.Rank determined via 'Latest by IR Creation Date' or 'Latest by AlphaRevOrder' Please check settings in: Sites/Data Import -> Edit Site def. --> Site Import Setting 1 -> Imoprt Data Conditions -> Lastest Item Revison Rule Hint: If you change setting of 'Lastest Item Revison Rule' Please Update data via: Sites/Data Import -> Imp.Extended -> 'Updated.Site Ir.Rank via Rev.Rule' === 09.06.2015 ============================================================================ - Version........: 2.1213 // J.Fes - Categorie......: Install and Setup - Additional Info: Ver.Info - Type...........: Change: - Description....: JobMgr check's now if OSQL is installed on Computer If OSQL is not installed on computer a error messagebox will be shown. === 05.06.2015 ============================================================================ - Version........: 2.1212 // S.Gueth - Categorie......: JCT - Type...........: New: - Issue..........: JobMgr.Issue-2379 - Description....: It is now possible to add a customer NxSyslog parser in the refile process. Methode is desinged for parsing customer data from NX.Syslog files. Results are contained in P.Result.Msg and own in a new section: [CustomKey:..] For usage: 1. Rename in dir ..\10-JobScripts\RefileNX##\ClientScripts\Resources File.: RfNxSylog_ResClRules_Custom_template.xml to...: RfNxSylog_ResClRules_Custom.xml 2. Edit settings in: RfNxSylog_ResClRules_Custom.xml 3. define in Job script: set ResultClassificationCustom_DPNE=%CmdCurRoot_DP%\Resources\RfNxSylog_ResClRules_Custom.xml or: set ResultClassificationCustom_DPNE=#JobRoot_DP#\Resources\RfNxSylog_ResClRules_Custom.xml === 29.05.2015 ============================================================================ - Version........: 2.1212 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Type...........: New: - Description....: It is now posible to define how many Job's of o specific JobRule may run on a JobClient. Please define it in JobControl -> JobRules -> JobComputer Syntax...: ComputerName1:n[:NoFurtherJob]ComputerName2:n[:NoFurtherJob] Example 1: Computer1:2Computer2:5 Example 1: Computer1 runs max 2 Jobs of JobRule Example 1: Computer2 runs max 5 Jobs of JobRule Example 2: *:1 Example 2: All Computer runs 1 Job of JobRule Example 3: Computer1:1:NoFurtherJobComputer2:5:NoFurtherJob Example 3: Computer1 runs max 1 Jobs of JobRule Example 3: Computer2 runs max 5 Jobs of JobRule Example 3: Behavior like Example 1 but if computer runs n JobMax then NO further job is searched in other JobRules === 28.05.2015 ============================================================================ - Version........: 2.1212 // S.Gueth - Categorie......: JCT - Type...........: New: - Issue..........: JobMgr.Issue-2375 - Description....: a syslog section file will noe be written for each refiled object this file is also available via J.Link === 26.05.2015 ============================================================================ - Version........: 2.1212 // J.Fes - Categorie......: Import Sites/Data Import - Additional Info: Ver.Info - Type...........: New: - Description....: New TC.Site Data Import Dialog created. Now it is posible to Import TC.Site Data in TimeFrames begin/end. With this methode it is posible to import Data form TC with more then 1 JobServer. === 20.05.2015 ============================================================================ - Version........: 2.1212 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Type...........: New: - Description....: in Job's selecting Items now function to add 'IR' Data to JobPacket is avialble. Enhancment is Done by code changes. === 12.05.2015 ============================================================================ - Version........: 2.1212 // S.Gueth - Categorie......: Settings JCT - Additional Info: Check.Settings - Type...........: New: - Description....: PLMPerformanceAnalyse: parameter: IgnoreMultipleLoggedInUsers determines if multiple logged in users with same username on the same pc should be ignored or not (default is false, should not be ignored) === 06.05.2015 ============================================================================ - Version........: 2.1212 // S.Gueth - Categorie......: JCT - Type...........: New: - Description....: SubAction DxfDwgExport in Action NxDataProcessing_2013_09 Method to export Dxf or Dwg files === 06.05.2015 ============================================================================ - Version........: 2.1212 // S.Gueth - Categorie......: JCT - Type...........: New: - Description....: SubAction ParaSolidExport in Action NxDataProcessing_2013_09 Method to export ParaSolid files === 06.05.2015 ============================================================================ - Version........: 2.1212 // S.Gueth - Categorie......: JCT - Type...........: New: - Description....: SubAction StepExport in Action NxDataProcessing_2013_09 Method to export Step files === 21.04.2015 ============================================================================ - Version........: 2.1211 // S.Gueth - Categorie......: Settings JCT - Additional Info: Check.Settings - Type...........: New: - Description....: SubAction Refile_Part in Action RefileTC_2012_01 for refiling single dataset parts to use it, set following in JM->Script/Param.->JC.Script(cmd).ParamExt: set JobMgr_RfPart=ON === 16.04.2015 ============================================================================ - Version........: 2.1211 // J.Fes - Categorie......: GUI - Additional Info: Ver.Info - Type...........: Change: - Description....: JobServer Titel Version info changed to new format Syntax is now: VX.YYYYY (Build:DD.MM.YYYY) Example: V2.12117 (Build:16.04.2015) === 15.04.2015 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: DB Import Scripting - Additional Info: Ver.Info - Type...........: Change: - Description....: Renamed function: from: IRs_and_Datasets_ImportFromTcDB_DoImportForIR to..: IRs_and_Datasets_ImportFromTcDB_DoImportForIR_Control === 14.04.2015 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: Scripting - Additional Info: Ver.Info - Type...........: Change: - Description....: Code changes on Class Datasets_and_Irs_cls General: Property DataType now changed generic types Please change in JS.Scripts for example: from: IrExportRecord.Value = MyValue to..: IrExportRecord = MyValue === 26.03.2015 ============================================================================ - Version........: 2.1210 // S.Gueth - Categorie......: JCT - Type...........: Change: - Description....: TCRefile: If no result in Refile JobLogFile was found, but everything in NX.Syslog is OK, then the object will get a warning (not an error) Res.Msg: [Rf:WRN:No refile results in RefileJobLogFile found!][Rf.NX.Syslog:LoadUp:OK,LoadDisp:OK,Save:OK,SecEnd:OK] becomes WRN in JobManager === 26.03.2015 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: Import Sites/Data Import - Additional Info: Ver.Info - Description....: On Importing manuel (via Extras->Import data of Item / IR) If you add only the item name to the input dialog then all data of Item and IR will be imported. === 24.03.2015 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: CheckBox - Additional Info: Ver.Info - Type...........: Change: - Description....: Outputformat of CheckBox result report enhanced - Parthistory lists now matching matching parthistory - Parthistory shows now which of the parthistory entries presents the last interactive save action (Last int. save) === 18.03.2015 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: JCT - Additional Info: Ver.Info - Type...........: Change: - Description....: -Action MigIdeas2NX_2013_10 -SubAction Status_remigrate_ResultEval If no data from TC extracted for a remigrated Object then the following message is added to the P.Res.Msg: [Status:ERR:no status info extracted form TC. Please !Chk data in TC!] === 18.03.2015 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: JCT - Additional Info: Ver.Info - Type...........: Change: - Description....: -Action MigIdeas2NX_2013_10 -SubAction finalChk_ResultEval.BOMCompair Adds now a new result section ('BOMCheck.BH-LC:') in ProcessResult. Example: [BOMCheck.BH-LC:BOM lines count OK (pre:40<->post:40)] === 16.03.2015 ============================================================================ - Version........: 2.1210 // S.Gueth - Categorie......: JCT - Type...........: Change: - Description....: Subaction from [CBDataOrg_CGMToTif_TifToTifArchiv_Custom01] to [CBDataOrg_CGMToTifOrPdf_FileToFileArchiv_Custom01] can now confert tif and pdf files === 09.03.2015 ============================================================================ - Version........: 2.1210 // S.Gueth - Categorie......: Settings CheckBox - Additional Info: Check.Settings - Type...........: New: - Issue..........: JobMgr.Issue-2294 - Description....: New setting 'PH.Attributes Mapper' in CheckBox settings manager. It can be used to map attributes having diffrent 'Attribute Titel' between NX versions === 09.03.2015 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Type...........: Change: - Description....: Handling of exceptions and errors during generating JobPacket's is improved. If an exception or error appears a detailed message is printet in JobManager and on JobClient: - if JobScript template file is missing - if an general exception happend Issues is solved by code changes. === 04.03.2015 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: Install and Setup DB - Additional Info: Ver.Info - Type...........: Change: - Description....: OSQL.EXE is now includet in JobServer resource files. Now it is not anymore required to have the connectivity components installed on a computer to process maintaining the JM.DB === 20.02.2015 ============================================================================ - Version........: 2.1210 // S.Gueth - Categorie......: JCT - Type...........: New: - Description....: SubAction 'I_IR_BOM_DS_eval' for Action 'TcMultiSite_2012_02' compares two Items with its ItemRev, Bom and Dataset informations Section Meaning ResCode on Error I.. Item 200 IR. ItemRevision 300 BOM Bill of Material 400 DS. Dataset 500 === 20.02.2015 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: Settings - Additional Info: Ver.Info - Type...........: New: - Description....: JobManager settings containing now a note field This can be used ta add notes belonging to the JobManger settings. see: JobMgr -> Extra -> Setup -> Settings -> Tab JobServer -> 01 Customer Notes -> 01 Customer Notes === 16.02.2015 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: CheckBox - Additional Info: Ver.Info - Type...........: Change: - Description....: Body.Density check was in case of specific regional settings wrong. Body.Density are now using Type decimal. With this change compairing results via Body.Density <= 0 are correct. === 16.02.2015 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: Import Sites/Data Import - Additional Info: Ver.Info - Type...........: Change: - Description....: During import in some cases Item.puid or Ir.puid value has been empty. Now data import checks if value is empty and try's to read the puid data again. #Hint: this issue is in evaluation phase. === 16.02.2015 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: GUI - Additional Info: Ver.Info - Type...........: Change: - Description....: JobManger did not write in all cases data to the JobManager log files. Issue is now solved by code changes. === 12.02.2015 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: CheckBox - Additional Info: Ver.Info - Type...........: Change: - Description....: Assembly Componten Name ItemId/RevisionId was not correct displayed if an bank char was containd in ItemId or RevisionId. Issue solved by code changes. === 11.02.2015 ============================================================================ - Version........: 2.1210 // J.Fes+S.Gueth - Categorie......: JobControl Settings - Additional Info: Ver.Info - Type...........: New: - Description....: JobClient - JobServer checks now if JobClient has enough Disk Space. If not enough Disk Space is avialble JobClient recives !! -NO new Job- !! Message is shown in JobClient and in JobServer See also settings in JobServer Settings === 09.02.2015 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: Import Sites/Data Import - Additional Info: Ver.Info - Type...........: Change: - Description....: Multisite Export Recorde Data contains now 'only' SiteID's of Sites that are registerd in JobManager Site list (see tab:'Sites/Data Import'). === 07.02.2015 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: Settings CheckBox - Additional Info: Ver.Info Check.Settings - Type...........: New: - Description....: New Setting:'AS.Comp.InstancName chars ignor list' available Now you can define a list of chars that are ignored during comparing Assembly Component InstanceName. === 06.02.2015 ============================================================================ - Version........: 2.1210 // S.Gueth - Categorie......: JobControl Settings - Additional Info: Check.Settings - Type...........: New: - Description....: Host Drive Settings settings added in JobServer settings: -- List of local disk to check disc space: Setup witch local drives of the clients will be checked for the available free disc space -- Local Drives space check: OK lower bound (GB): Setup the lower bound of the local disk space check, until it returns OK (default is 4GB) -- Local Drives space check: ERR upper bound (GB): Setup the upper bound of the local disk space check, until it returns ERR (default is 1GB) === 04.02.2015 ============================================================================ - Version........: 2.1210 // S.Gueth - Categorie......: JobControl Settings - Type...........: New: - Issue..........: JobMgr.Issue-2286 - Description....: JobClient reports the free space of the local drives Default Values: (editable in JobServer Settings) OK > 1 GB WRN between 0.1 and 1 GB ERR < 0.1 GB (connection to JS will be skipped) === 04.02.2015 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: JCT - Additional Info: Ver.Info - Type...........: Change: - Description....: -Action MigIdeas2NX_2013_10 -SubAction finalChk_ResultEval BOMCompair Rules Changed: If a SinglePart (SP) is checked during finalChk_ResultEval then 'BOMCompair' is skipped. Only Object of Dataset Type 'ProAsm' or 'IdeasAssembly' are processed via 'BOMCompair'. === 04.02.2015 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: JCT - Additional Info: Ver.Info - Type...........: Change: - Description....: -Action MigIdeas2NX_2013_10 -SubAction finalChk_ResultEval BOMCompair Rules Changed: If no 'BOM.xml pre' exist results is now set to ResultCode=0 Result.Status=D.WRN (Warning) Bevor this change it result was set to ResultCode=BOM-101 Result.Status=D.ERR (Error) Change done upon consultation Klaus Langer and Josef Feuerstein === 03.02.2015 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: JCT - Additional Info: Ver.Info - Type...........: New: - Description....: JobMgrDataOrg supports now also Nativ (File based) ObjectData Native Files are stored in following directory structure: #JobMgrDataRoot_DP#\#SiteId#\#ObjectFs_Vol#\#ObjectFs_NE#\.. #Example: JobMgrDataRoot_DP.............: \\PLMServer\JobManagerV2\90-DATA\XX_WorkInst_TestSystem\12-Data\JobMgrData Site..........................: NativData Site.NativeRoot_DP............: \\PLMServer\DataSahre\NxData ObjectData.ObjectFs_Vol_DPNE..: \\PLMServer\DataSahre\NxData\Module1\Module1_000005_A.prt ObjectData.ObjectFs_Vol.......: Module1 ObjectData.ObjectFs_NE........: Module1_000005_A.prt JobMgrDataRoot_Object.........: \\PLMServer\JobManagerV2\90-DATA\XX_WorkInst_TestSystem\12-Data\JobMgrData\NativData\Module1\Module1_000005_A\.. === 03.02.2015 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: CheckBox - Additional Info: Ver.Info - Type...........: New: - Description....: CheckBox Tools Supports now nativ mode. === 03.02.2015 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: Import Sites/Data Import - Type...........: Change: - Description....: If a Site is a nativ Site then ObjectFs_VOL value is the partial part of the full path to the File Object #Example: SiteDef.Nativ Root Dir: 'D:\NxData\Test1' ObjectFs_DPNE.........: 'D:\NxData\Test1\Product1\MainParts' ObjectFs_VOL..........: 'Product1\MainParts' === 30.01.2015 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Type...........: New: - Description....: If a Job do not return any Job.Results then JobData will be set to following results: P.Res.Code.............: JM-999999 P.Res.Msg..............: [ERR:Job did not returned any JobResults] P.Res.Status...........: D.U.ERR === 29.01.2015 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: ProcessGroups - Additional Info: Ver.Info - Type...........: Change: - Description....: Names and description of ProcessGroups settings are reorganized. ProcessGroup settings are now better to understand. === 28.01.2015 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Type...........: Change: - Description....: JobResults contained in *_JobResultsGenericV1.Log did not worked anymore. Reason was because files with name pattern *_JobResultsGenericV1.Log was not extracted from Job.zip file. Issue is now solved by code changes. === 23.01.2015 ============================================================================ - Version........: 2.1210 // J.Fes+A.Becker - Categorie......: JobControl - Additional Info: Ver.Info - Type...........: Change: - Description....: Local time of JobClient was wrong transverd to JobServer if a timesone has been in between. Issue is now fixed by code changes === 22.01.2015 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: Settings CheckBox - Additional Info: Check.Settings - Type...........: New: - Description....: New setting: Check behavior for Text that 'Empty or blanked' You now can define if 'Drafting.Text[s].Values' are both 'Empty or blanked' is to be checked By default 'Empty or blanked' is not checked === 22.01.2015 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: CheckBox - Additional Info: Ver.Info - Type...........: Change: - Description....: ChecBox - Result Viewer did NOT displayed in all cases the .tif files that belongs to the same .tif group. Issue is solved by code changes. === 21.01.2015 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: Import Sites/Data Import - Additional Info: Ver.Info - Type...........: Change: - Description....: JobServer analyses ImPrecice BOM's by Now via Ir creation Date. Before it was analyses by max(IR-ID). Changes are done by updating BOMc_ImPrecise.SQL + BOMc_ImPrecise_TCUA.SQL === 06.01.2015 ============================================================================ - Version........: 2.1210 // S.Gueth - Categorie......: Settings CheckBox - Additional Info: Check.Settings - Type...........: New: - Issue..........: JobMgr.Issue-2285 - Description....: Property 'MD.Volume Deviation Percentage Result Rules' in ModelData defines result classification rules for percentage volume deviation === 05.01.2015 ============================================================================ - Version........: 2.1210 // S.Gueth - Categorie......: CheckBox - Type...........: New: - Issue..........: JobMgr.Issue-2285 - Description....: Parameter 'CBMoveExtractedFilesToArchive' in CB config Defines if extracted CheckBox files (xml, cgm) should be moved to the archive or not Default is 'true' HINT: if 'false', then extracted files will be deleted === 30.12.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: JCT - Additional Info: Ver.Info - Type...........: Change: - Description....: -Action MigIdeas2NX_2013_10 -SubAction Status_final_ResultEval In case a Item/Rev contains has 'NO' 3D cmm part (of Types:IdeasPart,IdeasAssembly,ProPrt,ProAsm). but contains 1 UgMaster then results are returned as OK. === 27.12.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: TaskScheduler - Additional Info: Ver.Info - Type...........: Change: - Description....: Issue: Tasksheduler Job's with defined TimePoints [TP=HH:MM][TP=HH:MM] dit not worked anymore. Issue is now solved by code changes in JobServer and JFProgLib.dll. === 18.12.2014 ============================================================================ - Version........: 2.1210 // A.Becker - Categorie......: Settings - Additional Info: UpdDb=No - Type...........: Change: - Description....: User Settings are stored in a XML file instead of the windows registry. The file is located in the users directory within 01-BinServer.Custom Use the methods from the new UserSettings class to load or save values. === 17.12.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: JCT - Additional Info: Ver.Info - Type...........: Change: - Description....: -Action MigIdeas2NX_2013_10 -SubAction CMM_ResultEval Parsing of cmm logfiles enhanced for ProDrw Now in CMM.log we searching for Key: ' * Processing drawing:' + #ItemId#/#RevId# === 16.12.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: ObjectList - Additional Info: Ver.Info - Type...........: New: - Description....: Filter for ObjectData extendet: Now it is also posible to search for data via 'Object Puid' === 16.12.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: Admin - Additional Info: Ver.Info - Type...........: Change: - Description....: JobMgr Database Setup/Update === 16.12.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: Admin - Additional Info: Ver.Info - Type...........: Change: - Description....: JobMgr Database Setup/Update New Setup avialble to run a Custom T-SQL Script List in JobMgr Database. Use Extra->SETUP->Setup database->Datbase Setup->21 - Database Custom Setup ... and select in file dialog one of your custom T-SQL Script List File (*SQLScriptList.txt) === 12.12.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: JCT - Additional Info: Ver.Info - Type...........: Change: - Description....: -Action MigIdeas2NX_2013_10 -SubAction finalChk_ResultEval In case a Item/Rev contains has 'NO' 3D cmm part (of Types:IdeasPart,IdeasAssembly,ProPrt,ProAsm). but contains 1 UgMaster then results are returned as OK. === 12.12.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: JCT - Additional Info: Ver.Info - Type...........: Change: - Description....: -Action MigIdeas2NX_2013_10 -SubAction CMM_ResultEval In case a Item/Rev contains has 'NO' 3D cmm part (of Types:IdeasPart,IdeasAssembly,ProPrt,ProAsm). but contains 1 UgMaster then: Returns OK if 1 UGMASTER exist with name schema: ItemId-RevId Returns WRN if 1 UGMASTER exist other name schema: ItemId-RevId === 12.12.2014 ============================================================================ - Version........: 2.1210 // A.Becker - Categorie......: GUI ObjectList - Additional Info: UpdDb=No - Type...........: New: - Description....: Objects Filter Customer Defaults can be easy selected by a new control above the objects FilterPanel. It features Layout Default-Restore, Save/Restore custom layout, Quick Restore custom filter from dropdown. In addition the last 10 filters used are automatically saved by a feature called RingBuffer. === 12.12.2014 ============================================================================ - Version........: 2.1210 // A.Becker - Categorie......: GUI ObjectList - Additional Info: UpdDb=No - Type...........: New: - Description....: GridLayout Customer Defaults for Objects List can be easy selected by a new control above the objects FilterPanel. It features Layout Default-Restore, Save/Restore custom layout, Quick Restore custom layout from dropdown. === 09.12.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: JobControl TaskScheduler - Additional Info: Ver.Info - Type...........: Change: - Description....: If JobServer start's with JobControl:A or JobControl:R then Titel of JobServer will contain string 'JobControler' If JobServer start's with TaskScheduler:ON then Titel of JobServer will contain string 'TaskScheduler' === 05.12.2014 ============================================================================ - Version........: 2.1210 // A.Becker - Categorie......: GUI ProcessGroups - Additional Info: UpdDb=No - Type...........: New: - Description....: Added a new property [ProcStateKind] to the details of a ProcState. The value of this property modifies the behavior of the ProcState as follows: Normal: The same behavior like before QueryOnly: The ProcState cannot be selected to manually set a Process Status Can be used for status which only will be set by processes for for combined query status like TRUNXX VisualSeparator: The name and display text become fixed and the ProcState is no more selectable by the user. The default separator colors are DarkGray/Transparent, but they can be overridden by custom color selection. The only purpose is to provide visual separations between groups of ProcStates. === 05.12.2014 ============================================================================ - Version........: 2.1210 // A.Becker - Categorie......: GUI - Additional Info: UpdDb=No - Type...........: Change: - Description....: The application standard grid layouts can be updated using the View->Restore functions while holding the Shift-Key. This modifies the Action from Restore to Store. === 04.12.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: JCT - Additional Info: Ver.Info - Type...........: New: - Description....: -Action NxDataProcessing_2013_09 add new -SubAction NXMacroExecute With this Tool you can run an NX.macro on each NX.Dataset it is containd in the JobPacket. Details see: ..03-BinPublic.ClientServer\JobManagerCmdTools_Docu\30.NxDataProcessing_2013_09\NxDataProcessing_2013_09_01_docu.txt === 04.12.2014 ============================================================================ - Version........: 2.1210 // A.Becker - Categorie......: GUI ObjectJobResults Settings - Additional Info: UpdDb=No - Type...........: New: - Description....: The custom columns for process results can be edited direct from the View-Menu for the current procStateCol. After edit, the columns in the grid are updated instantly. === 04.12.2014 ============================================================================ - Version........: 2.1210 // A.Becker - Categorie......: GUI ObjectJobResults Settings - Additional Info: UpdDb=No - Type...........: New: - Description....: The custom ProcStates can be edited direct from the View-Menu for the current procStateCol. After edit, the columns in the grid are updated instantly. === 04.12.2014 ============================================================================ - Version........: 2.1210 // A.Becker - Categorie......: GUI Settings - Additional Info: UpdDb=No - Type...........: Change: - Description....: New structure for grid layout saved files. The extension changed from .xml to .jsgl (JobServer GridLayout) Multiple custom table layouts can be saved with given names. Each Grid has its own folder under 01-BinServer.Custom\_CustomDefaults\Settings\ Refer to detailed documentation in file:///V:\JobManager\ProgEntw\Ver02\JobManagerV2\10-Documentation.Application.Working\01-Dokumentation-Entwicklung\JobManagerV2_EntwDokumentation_A.Becker.pptx See on page 01.12.2014 Entwicklung JobManager: Organizazion of saved GridLayouts === 28.11.2014 ============================================================================ - Version........: 2.1210 // S.Gueth - Categorie......: JobControl JCT - Type...........: New: - Description....: Added JobData4PostAction Class, to define PostActions that will be done in the JobServer after a Job was processed on the client for example: renaming of an object, deleting an object etc... === 05.11.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: Install and Setup - Additional Info: Ver.Info - Type...........: Change: - Description....: Updating JS.Databases via executing SQL Scripts 'logic' for continue runnig SQL Scripts Is changed if clicking 'YES' each Scripts will be processed without stoping after executing if clicking 'NO' after processing each Scripts process will 'stop' === 05.11.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: GUI Admin Import Sites/Data Import - Additional Info: Ver.Info - Type...........: New: - Description....: AdminMode is nwo avilable. To prevent unmeant changes in JobServer config settings a new AdminMode Button is added to the JobServer toolbar. Config settings are stored in Grids of 'Sites/Data Import' 'Scripts/Param' 'Job Control' If enabled you can edit the config settings in JobServer. If disabled you can NOT edit the settings in JobServer. === 05.11.2014 ============================================================================ - Version........: 2.1210 // S.Gueth - Categorie......: CommandLineArgs - Type...........: New: - Description....: New command line argument /TCPPort for JobClient and JobServer avilable. Specifies the port on that JobClient's connecting to the JobServer. Doc Info: If not set, port from settings.xml will be used. #Example: /TCPPort 13001 === 05.11.2014 ============================================================================ - Version........: 2.1210 // S.Gueth - Categorie......: CommandLineArgs - Type...........: New: - Description....: New command line argument /WorkInstTitel for JobClient and JobServer avilable. Specifies the 'JobServerWorkInstance' titel. #Doc Info: If not set, 'JobServerWorkInstance' from settings.xml will be used. #Example: /WorkInstTitel P.System-01 === 03.11.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Type...........: Change: - Description....: Usning in JobControl -> JobComputer Scripts lead in case that JobComputer Data was not saved to a Error. Issue is now saved by code changes === 30.10.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: JCT - Type...........: Change: - Description....: -Action MigIdeas2NX_2013_10 -SubAction CMM_ResultEval Excutes now also -SubAction BomCompair After this Update -SubAction BomCompair is NOT anymore needet please check Script's === 30.10.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: JCT - Type...........: Change: - Description....: -Action MigIdeas2NX_2013_10 -SubAction FinalResultEval Excutes now also -SubAction BomCompair After this Update Process BOM eXtract for JobData1ToProcess is needet bevor running -SubAction finalChk_ResultEval === 30.10.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Type...........: New: - Description....: In JobScripts also Windows PowerShell Scripts *.ps1 can be selected. All Windows PowerShell Scripts (*.ps1) containd in JobScript directory will be filled out with the value of the placeholder variables. (placeholder Example: #03-BinPublic_DP# ..) === 24.10.2014 ============================================================================ - Version........: 2.1210 // S.Gueth - Categorie......: JCT - Type...........: Change: - Description....: RfInputList_cls und RfInputListItem_cls eingeführt, um Item und Revision in der Inputliste miteinander zu vergleichen verhindert, dass doppelte cli namen mit einem anderen Trennzeichen in der Inputliste auftauchen === 23.10.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Type...........: Change: - Description....: If in JobControle Rule DS_of_IR was used with IncObjTypes then include objects was not added to JobPacket. Issue is now solved by code changes === 17.10.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: ObjectList - Additional Info: Ver.Info - Type...........: Change: - Description....: to view file content via JobLink faild in case that path to file containd in JobLogFiles was to long. Issue is now solved via code changes. === 15.09.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: JobControl - Additional Info: UpdDb=Yes - Type...........: New: - Description....: JobControlRules extendet Now it is posible to define in JobControlRules to add 'IR' (or and) 'ITEM' data additional to the JobData. If you activate this Rule then additional to the selected JobData also 'IR' (or and) 'ITEM' DATA are addet to JobData1ToProcess.xml #Example: Use this rule if Job Selection is based on Datasets but also IR or ITEM Data is needet in the Job. #Doc Info: Please notice if rule is activated also Process Status is set to additional selected Data. === 11.09.2014 ============================================================================ - Version........: 2.1210 // S.Gueth - Categorie......: JCT - Type...........: New: - Description....: New Subaction 'CBCompair_Custom03' for custom checkBox parthistory compair === 03.09.2014 ============================================================================ - Version........: 2.1210 // S.Gueth - Categorie......: JCT - Type...........: New: - Description....: parameter'-JobMgrDataOrg_Root_DP_2' in 'CBDataOrg_CGMToTif_TifToTifArchiv_Custom01' copy tiff files to a second archive === 03.09.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: ObjectList - Additional Info: UpdDb=Yes - Type...........: Change: - Description....: Performance to read and display Object data in register Objects List improved via SQL and displaying the Data in Objects datagrid. === 14.08.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: TaskScheduler Settings - Additional Info: Ver.Info Check.Settings - Type...........: New: Doc: - Description....: ReDo times are in seconds #Example: 10min * 60sec/min = 600sec #Example: [WD=* TP=05:00] [WD=* TS=07:00-18:00 ReDo=600] [WD=* TS=18:00-05:00 ReDo=3600] |-> every Day betw. 07:00-18:00 ReDo every 10 min the defined Job. === 14.08.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: Import Sites/Data Import - Additional Info: UpdDb=Yes Ver.Info - Type...........: Change: - Description....: Import imporved: Now it is proved if IR has multible Dataset with same name of same type Now if multible WRN/ERR are seperated by Char: '' During Import folowing WRN and ERR are proved: WRN_100_BOMAnaylse_LevMax appear if during 'AP-BOM Analyse' max levels is exceeded WRN_110_BOMAnaylse_CompMax appear if during 'AP-BOM Analyse' max comp count is exceeded WRN_120_BOMAnaylse_TimeMax appear if during 'AP-BOM Analyse' max duration is exceeded ERR_130_BOM_isSelfRef appear if during 'AP-BOM Analyse' returns that BOM is selfreferncing ERR_131_BOM_SubAp_isSelfRef appear if during 'AP-BOM Analyse' returns that a Sub of BOM BOM is selfreferncing WRN_140_DSHasMultiIrRefs appear if found that a Dataset has refernces in mulible revisions ERR_150_IrHasDsWithSameName appear if found that a revision has Datasets with same name of same type ERR_200_DateTimeIsNull appear if found that Date Time Data are not set. ERR_201_DateTimeFormatWrong appear if found that a DateTime format has wrong format ERR_301_DSIsMissingFile appear if found that Dataset has no CAD Part File in named refernce ERR_302_DSHasMutiCADFiles appear if found that Dataset has more then 1 CAD Part File in named refernce === 14.08.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: Import Sites/Data Import - Additional Info: Ver.Info - Type...........: Change: - Description....: Base Import Default Conditions changed ImportAssembMaxLev from 20 to 30 Levels IImportAssembMaxComp from 25000 to 250000 Component's === 11.08.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: ProcessGroups - Type...........: Change: - Description....: Number of ProcessGroups increased to 20. Solving Issue: In somme cases changes on Process Groups was not saved to database. Bevor this change it was needet to reload Process Group settings befor edit settings. Issue is now solved by code changes. === 11.08.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: DB Import Sites/Data Import - Additional Info: Ver.Info - Type...........: New: - Description....: Data Model extendet: Now you can use Customer defined Attibutes. In Site definitions you can define settings for extracting Customer Attributes from TC.DB into JobMgr.DB. Use example: Reading Data from Ir Forms Attributes and import it into JobMgr. Current limitation: it works only for Datasets. === 30.07.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: Import Sites/Data Import - Additional Info: UpdDb=Yes - Type...........: New: - Description....: Data Import Assembly-BOM analyse improved: - Performance improved on reading BOM data from TC by Grouping same BOM Lines into one BOM Line + reciving N.Counting - Performance improved by using cashing BOMLine data during import. With this change any already readed Data is not needet to read again from TC Database. - BOM Unique Components now also analysed Now you can see how many 'Unique components' is contained in an assembly see data in Register: Objects Lists colume 'O.AP.Unique' First test on testsystems of addPLM shows performance improvments from 40% - 60% === 21.07.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: CheckBox - Additional Info: Ver.Info - Type...........: Change: - Description....: CheckBox Extract contains in section [JC:] details about termination reason. #Example: [JC:ERR Terminated:runtime limit of 7200 seconds reached] === 18.07.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: Import Sites/Data Import - Additional Info: UpdDb=Yes - Type...........: Change: - Description....: Option ImportTcApBomLineUgGometryNo_DoCount removed This Option defined not to count BOM Lines having UGGeometrie NO occurences Option was removed because no cutomer is using this. === 17.07.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: JCT - Additional Info: Ver.Info - Type...........: New: - Description....: -Action CBTools_2012_05 -SubAction CBMoveCBFilesToCBArchiv NX.Sylog Analyse Extendet with new Section: NX.Syslog if NX.Syslog contains on end 'replaced with' then P.Res.Code = NXSyslog-901 P.Res.MSG += [NX.Syslog:ERR NX.Syslog contains on end 'replaced with'] === 09.07.2014 ============================================================================ - Version........: 2.1210 // S.Gueth - Categorie......: JCT - Type...........: New: - Issue..........: JobMgr.Issue-2258 - Description....: Subaction 'BOMCompair' in MigIdeas2NX_2013_10 Compairs BOM contend between 'Pre CMM' to 'Post CMM' key meaning ERR Result Code XmlPre extracted bom xml file pre cmm process (OK/ERR) BOM-101 XmlPost extracted bom xml file post cmm process (OK/ERR) BOM-102 BH-IR BOM header: OK if Item Revision is matching (OK/ERR) BOM-110 BH-PS BOM header: OK if BOM's is still Presice (OK/ERR) BOM-111 BH-BLPre if bom lines in pre bom is missing in post bom (OK/ERR) BOM-113 in this case a BOM Line is not nexisting anymore after CMM BH-LC bom header: bom lines count (pre:n<->post:n) (is MSG) 0 BH-BLPost bom lines in post bom missing in pre bom (is MSG) 0 in this case a BOM Line is added new after CMM BL-OcNs:ItemRev bom line: occurence notes (is MSG) 0 BL-SqNr:ItemRev bom line: sequence number (is MSG) 0 === 30.06.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: JCT - Additional Info: Ver.Info - Type...........: Change: - Description....: -Action RefileTC_2012_01 -SubAction EXTRACT If Refile JobData contained only Nonmaster Object of IR then IR was not addet to 'RfInput list' Issue is now resolved by code canges === 30.06.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: JCT - Additional Info: Ver.Info - Type...........: Change: - Description....: -Action RefileTC_2012_01 -SubAction extract Refile input list will now be written with: Encoding: System.Text.Encoding.GetEncoding(1252) === 30.06.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: JCT - Additional Info: Ver.Info - Type...........: Doc: Change: - Description....: -Action RefileTC_2012_01 -SubAction EVALUATE Evaluation of Refile results did not worked correct if JobData contained national letters like ÄÖÜ äöü Issue is now resolved by code canges #Doc: Problem was soleved by reading Textfile content with Encoding: System.Text.Encoding.GetEncoding(1252) === 26.06.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: JCT - Type...........: Change: - Description....: If JobData is printet folowing extensions has been Done: - now you can see if printet are the content of JobData1ToProcess.xml JobData2Result.xml - now if JobResult has ProcessResultExtendedData then ProcessResultExtendedData is printed in a second line === 26.06.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: JCT - Additional Info: Ver.Info - Type...........: Change: - Description....: Action: -MigCmm3D2NX_2013_10 SubAction: -Status_final_ResultEval In case evaluation of having wrong Status after prosessing set final status Objects has been Returned with P.Res.State:D.WRN Now Result returns: P.Res.State: D.ERR P.Res.Msg..: [final:ERR][Status.Cmm3D:ERR:is wrong:Locked][NxObj:OK: NX.Dataset exist] === 17.06.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: JCT - Additional Info: Ver.Info - Type...........: Change: - Description....: -Action MigIdeas2NX_2013_10 -SubAction finalChk_ResultEval If Dataset names of a migrated NX Dataset was longer then 32 chars then the correspondending NX - Ideas or ProE Dataset did not matched. Out of this reason JobMgr always returned that the NX Dataset did not exist. Problem is now solved by code changes. === 17.06.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: JCT - Additional Info: Ver.Info - Type...........: Change: - Description....: Action: -MigCmm3D2NX_2013_10 SubAction: -InitalResultsEval In case that no correspondending Dataset containd in Extracted Tc Data was not found in JobManager.JobData1ToProcess then an MessageBox with message: hier comes up. Solution: MessageBox is replaced by a message in command windows: ERR: for extracted Tc Dataset:[#ObjectCliNameCompactInfoForOutput#] no correspondending Dataset found in JobData1ToProcess. ERR: |-> results are useless and will be ignored. Problem is now solved. === 12.06.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Type...........: Change: - Description....: Deleting JobControl Rules Dit not worked in all cases. Problem is now solved by code changes === 11.06.2014 ============================================================================ - Version........: 2.1210 // S.Gueth - Categorie......: Settings CheckBox - Additional Info: Check.Settings - Type...........: New: - Description....: CheckBox Config Parameter : 'CBDurationsAnalyse' If true, the duration for load, update, extract and the entire duration of the cb extract of each part file will be parsed and the result will be printed into P.Res.Msg.Ext.Data === 06.06.2014 ============================================================================ - Version........: 2.1210 // S.Gueth - Categorie......: Install and Setup Settings - Type...........: New: - Description....: Database Settings insert, to create the database via PLMPerformance Analyse === 09.05.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: JCT - Additional Info: Ver.Info - Type...........: Change: - Description....: -Action RefileTC_2012_01 -SubAction EVALUATE Rf.NX.Syslog do not sets P.Res.Has.WRN = 'true' anymore === 09.05.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: JCT - Additional Info: Ver.Info - Type...........: Change: - Description....: MigIdeas2NX_2013_10.CMM_ResultEval Issue P.ResMsg contains wrong Message [CMM:DoExecute:YES..(!but is not yet done!)][..] is now fixed. Description of solution: If in *_cmm.log section for Dataset is found then P.ResMsg = '[CMM:DoExecute:YES]' ... If in *_cmm.log section for Dataset is !-NOT-! found then P.ResMsg = '[CMM:DoExecute:NO]' ... === 28.04.2014 ============================================================================ - Version........: 2.1210 // S.Gueth - Categorie......: ObjectList JCT - Type...........: New: Doc: - Issue..........: JobMgr.Issue-2246 - Description....: generates the input list to extract jt files -JobRoot_DP xx #Doc: Root.Verzeichniss in dem die JobDaten liegen -ObjectList_SP_DPNE c:\list_sp.txt #Doc: path and name of the list for the single parts -ObjectList_AP_DPNE c:\list_ap.txt #Doc: path and name of the list for the assembly parts === 28.04.2014 ============================================================================ - Version........: 2.1210 // S.Gueth - Categorie......: JCT - Type...........: New: Doc: - Issue..........: JobMgr.Issue-2246 - Description....: analyses the jt process logfiles -JobRoot_DP #JobRoot_DP# #Doc: Root.Verzeichniss in dem die JobDaten liegen -LogFilesDir #JobRoot_DP#\JtTCUpdate #Doc: path to the directory where the jt_log are === 28.04.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: Settings JCT - Additional Info: Ver.Info Check.Settings - Type...........: Change: - Description....: if using -SubAction CMM_InpListGen with -force switch then folowing rules are active: forces all datasets to be included in 'Status_final_InpList' 1. even if: BomView analyse returns false forces all datasets to be included in 'Cmm_InpList' 1. even if: BomView analyse returns false 2. even if: corresponding NX Dataset exist 3. even if: cmmStatus is not OK === 28.04.2014 ============================================================================ - Version........: 2.1210 // S.Gueth - Categorie......: JCT - Type...........: New: - Issue..........: JobMgr.Issue-1145 - Description....: Parameter: -objectType for JobDataExtract only objects with the given object type will be extracted, seperate with (UGMASTERUGPART) === 25.04.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: ObjectList - Additional Info: UpdDb=Yes - Type...........: New: - Issue..........: JobMgr.Issue-2249 - Description....: Dataset List contains now new colume O.FS_LastModDate This colume contains the last modification date of file object. The file object is the last version in the named reference of Dataset. === 22.04.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: ObjectJobResults - Additional Info: Ver.Info - Type...........: Change: - Description....: CMM Result Evaluation checks now if in 'Named Refrences' of NX-Dataset is an NX-Partfile referenced. P.Msg: [NxObj:ERR:NX.Dataset(UgMaster) exist but:ERR_301_DataSetIsMissingFileObject] === 22.04.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: ObjectJobResults - Additional Info: Ver.Info - Type...........: Change: - Description....: CMM Result Evaluation checks now if in 'Named Refrences' of NX-Dataset is an NX-Partfile referenced. P.Msg: [NxObj:ERR:NX.Dataset(UgPart) exist but:ERR_301_DataSetIsMissingFileObject] === 22.04.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Type...........: New: - Description....: the folowing new variables can be used to get dir where CustomTcSQL are stored into - #TcSQL_JS_DP# or #TcSQL_DP# can be used to point to Dir: ..\01-BinServer.Custom\_CustomTcSQL\#TcSiteId# - #TcSQL_JC_DP# can be used to point to Dir: ..\02-BinClient.Custom\_CustomTcSQL\#TcSiteId# === 16.04.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Type...........: Change: - Description....: Filtering of JobControl Rules via JC.J.Rule.filter by:'J.JobName' is now working correct. === 16.04.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: JobControl - Type...........: New: - Description....: JobControl Rules is extendet Now you can define in JobComputers Object selection rules for Volume and Group If JobComputers.JobR.sel.O.Group <> '' then this value replaces value defined in JobControlRule.sel.O.Group If JobComputers.JobR.sel.O.Vol <> '' then this value replaces value defined in JobControlRule.sel.O.Vol === 10.04.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: Import Sites/Data Import - Additional Info: Ver.Info - Type...........: Change: - Issue..........: JobMgr.Issue-2240 - Description....: JobServer nativ data import stopted with NullReferenceException Problem is now solved === 10.04.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: Import Sites/Data Import - Type...........: Change: - Issue..........: JobMgr.Issue-2239 - Description....: Import of Data from TC Database was not working if TC.Database is a MSSql Server Problem is now solved === 02.04.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: TaskScheduler - Additional Info: Ver.Info - Type...........: Change: - Issue..........: JobMgr.Issue-2231 - Description....: Problem: Tasksheduler Redoes Job's in wrong intervals Issue is now solved by code changes in JobServer and JFProgLib.dll. === 24.03.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: Import JobControl - Type...........: New: - Description....: During import JobResults only needed files are expanted from JobLog.zip files SearchNames are: - *Result.xml - *ToProcess.xml - *PostAction.xml (#New: 2.121001.12.2014J.Fes) - *info.xml - *.syslog - *RunAfterImportOnJobServer.* - *_JobResultsGenericV1.Log (#New: 2.121028.01.2015J.Fes) === 20.03.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: ObjectList - Additional Info: Ver.Info - Type...........: New: - Description....: Changes on List of Dataset view Ren Colume: O.Rel.State.Date renamed to O.Rel.Date === 20.03.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: ObjectList - Additional Info: Ver.Info - Type...........: New: - Description....: Changes on List of Dataset view New Colume: Ir.Rel.State New Colume: Ir.Rel.Date === 14.03.2014 ============================================================================ - Version........: 2.1210 // S.Gueth - Categorie......: JCT - Type...........: New: - Issue..........: JobMgr.Issue-1213 - Description....: SubAction CheckMateLogFileEval for Action LongTermArchivement_2014_02 Analyse a Check Mate xml file for an Object and sets the status === 07.03.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: JCT - Additional Info: Ver.Info - Type...........: New: - Description....: Print of JobResults now colores result date depending on ResultCode If ResultCode = '0' --> Result is printed in green color If ResultCode <> '0' --> Result is printed in red color === 27.02.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Type...........: Change: - Description....: Refile Process Group includes now only that Datasets Types of IR-'UGMaster' that are selected in JobControl Rule. please look settings in JobControl Rules of P.Rf Tab: 'Job Definition' -> sel:O.Special: 'DS.all OF IR' -> Incl.O.Type(s) === 27.02.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: JobControl Settings - Additional Info: UpdDb=Yes Check.Settings - Type...........: New: - Description....: JobControl -> JobComputer settings extendet Now you can set for JobComputer's a JobRule.Name filter that defines who of the Rules are be used by this JobComputer Please look at: JobControl -> JobComputer -> New Colume: [J.Rule.filter by:'J.JobName'] === 26.02.2014 ============================================================================ - Version........: 2.1210 // S.Gueth - Categorie......: JCT - Type...........: New: - Issue..........: JobMgr.Issue-1219 - Description....: SubAction MoveToArchive for Action LongTermArchivement_2014_02 moves or deletes specified files to/from the archive protocoles every single step in an archive log file === 26.02.2014 ============================================================================ - Version........: 2.1210 // S.Gueth - Categorie......: JCT - Type...........: New: - Issue..........: JobMgr.Issue-1214 - Description....: SubAction StepLogFileEval for Action LongTermArchivement_2014_02 Analyse a Step log file for an Object and sets the status === 26.02.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: Reports - Additional Info: Ver.Info - Type...........: New: Doc: - Issue..........: JobMgr.Issue-1181 - Description....: This Report lists all happend Errors of all Sites with following Data Columes: O.S.Or.Rep Object.: 1-SO (SiteObj) O.Nx.Type.........: AP O.Type............: UGMASTER P.Res.Code........: 940007 P.Res.Msg.........: ERROR Message R.Error.Count.....: 2 === 07.02.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: DB CheckBox - Additional Info: Ver.Info - Type...........: New: - Description....: In special case syntax of CBExtract.csv file contains unexpected New Lines. New Parser is now correcting this problem. #Example: --------- Readet File Content: ObjectCLIResultCodeResultMsgxml_filename @DB/CB_TEST_AP01/A949982 NX License Error: License server system does not support this feature. [ -18 ] [2547]C:\Temp\JobClient\Tc83_CB1_ExtrNx75_00199_CustomerNameShort\JobTemp\CB_TEST_AP01_A_master.xml Parsed File Content: ObjectCLIResultCodeResultMsgxml_filename @DB/CB_TEST_AP01/A949982NX License Error: License server system does not support this feature. [ -18 ][2547]C:\Temp\JobClient\Tc83_CB1_ExtrNx75_00199_CustomerNameShort\JobTemp\CB_TEST_AP01_A_master.xml === 05.02.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: ObjectList - Additional Info: Ver.Info - Type...........: New: - Issue..........: JobMgr.Issue-1179 - Description....: ProE Daten Typen hinzugefuegt ProPrt (ProE-Einzelteil) ProAsm (ProE-Baugruppe) ProDrw (ProE-Zeichnung) === 30.01.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: JCT - Additional Info: Ver.Info - Type...........: Change: - Description....: Job.Process Header informations new formated. Now you have better overview about the JobProcess Details and Versions. #Example: JCT.Version.....................: 2.12109.3001.2014 Action.Version..................: V2014-01-30.01/A.Becker+J.Fes Action.Name.....................: ActionName_2013_10 Action.SubAction................: SubActionName Job.Name........................: TC83_RF_AP_N_07500_addPLM Job.Start.......................: 30.01.14 15:01 === 29.01.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: JCT - Additional Info: Ver.Info - Type...........: Change: - Description....: MigIdeas2NX_2013_10.CMM_ResultEval.ProcessTryKill extended Please use Option -LogFile #Log_DPNE# to write ProcessTryKill informations into this File. === 23.01.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: JCT - Additional Info: Ver.Info - Type...........: Change: - Description....: -Action RefileTC_2012_01 -SubAction extract In Special cases IR data was not added to 'RfInput list' Issue is now resolved by code canges === 20.01.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: JCT - Additional Info: Ver.Info - Type...........: Change: - Description....: CMM Process Result Evaluation filters now: from *_cmm.log the filename of TC-Server Process. and parses from this file name the TC-Server PID. #Example: find in _cmm.log file line: ' Teamcenter Log File Name: E:\TC_Temp\tcserver.exe21a815a7.syslog' parsing:|....| Convert.ToInt32('21a8', 16) = 8616 (=TCServer PID) If Process with the parsed PID exist's then this Process will be stopped. Thanks to: Waldemar Weber === 20.01.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: JCT - Additional Info: Ver.Info - Type...........: Change: - Description....: MigIdeas2NX_2013_10.CMM_ResultEval P.ResMsg contained doubble Text 'CMMLog:' #Example: [CMMLog:[CMMLog:..]] This Issue is now fixed. === 10.01.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: Import - Additional Info: Ver.Info - Type...........: Change: - Description....: During Site DataImport Data of Colume: 'Imp.Data.IrLast.ModDate Start' It is now ensured that every 120 sec this data is update and saved in JS.Site Data === 03.01.2014 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Type...........: Change: - Description....: JobServer Mode: 'Manuell' Button and function removed. === 16.12.2013 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: JCT - Additional Info: Ver.Info - Type...........: Change: - Description....: -Action RefileTC_2012_01 -SubAction EVALUATE Rf.NX.Syslog reports now: 'Save:NO' if no save action found for Part. === 16.12.2013 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Type...........: Change: - Description....: JS JobControler outputs now more details if a JobClient runs in TestMode. Now all Job's that are skippt is reported into message window. === 12.12.2013 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: JCT - Additional Info: Ver.Info - Type...........: New: - Description....: Evaluate refile results via JM.CmdTools is implemented. Parsing of RfNx.syslog is also implemented. Parsing of RfNx.syslog do not changes the ProcessResult Code . Output of Rf.Result Example: P.Res.Msg [Rf:OK][Rf.NX.Syslog:LoadUp:OK,LoadDisp:OK,Save:OK,SecEnd:OK] | |-> Parsed Details from Rf.NX.Syslog file |-> Parsed Details from Rf.Log.Files === 04.12.2013 ============================================================================ - Version........: 2.1210 // J.Fes - Categorie......: DB Import Sites/Data Import Settings - Additional Info: Ver.Info - Type...........: Change: - Description....: With this version Item information is imported to JM.DB if at least one IR of Item contains CAD Datasets. If you activate in Register: Sites/Data Import -> Site -> Register 'Site TC Import Settings 1' Option: Import 'all' Item Data [x] then all Item Data are imported to JM.DB Even if IR of Item do not contain any CAD Dataset. === 27.11.2013 ============================================================================ - Version........: 2.1200 // J.Fes - Categorie......: DB Import - Additional Info: Ver.Info - Type...........: Change: - Description....: During importing data from TC.DB to JM.DB a Message is printed if no CAD Dataset found in Item Revision === 25.11.2013 ============================================================================ - Version........: 2.1200 // J.Fes - Categorie......: JCT - Additional Info: Ver.Info - Type...........: New: - Description....: -Action MigIdeas2NX_2013_10 -SubAction CMM_ResultEval Parsing of cmm logfiles is now integrated. === 25.11.2013 ============================================================================ - Version........: 2.1200 // J.Fes - Categorie......: Reports - Additional Info: Ver.Info - Type...........: New: - Description....: New Volume Reports avilable: - Report_102_VolumeStatistic_DSType_All counts in group's Sites, Volumes, Types - Report_103_VolumeStatistic_DSType_NX counts in group's Sites, Volumes, only NX DataSets - Report_104_VolumeStatistic_DSType_Ideas counts in group's Sites, Volumes, only Ideas DataSets === 23.11.2013 ============================================================================ - Version........: 2.1200 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Type...........: New: - Description....: JobControl:JobComputers list the Colume Org.Notice is now formated in large text syle. Now you can add new lines and font is set as courier new (Blockfont). === 18.11.2013 ============================================================================ - Version........: 2.1200 // S.Gueth - Categorie......: Settings JCT CheckBox - Additional Info: Check.Settings - Type...........: New: - Description....: Result Classification Rules for volume deviation is now avilable. === 18.11.2013 ============================================================================ - Version........: 2.1200 // S.Gueth - Categorie......: Settings JCT CheckBox - Additional Info: Check.Settings - Type...........: New: - Description....: result classification rules for centre of gravity === 18.11.2013 ============================================================================ - Version........: 2.1200 // J.Fes - Categorie......: ObjectList - Additional Info: Ver.Info - Type...........: New: - Description....: In JobServer 'Object-Liste' Register Object's ID filter Dialog enhanced. This Dialog contains now a new button to save listed ID's into an file. === 13.11.2013 ============================================================================ - Version........: 2.1200 // J.Fes - Categorie......: DB CheckBox - Additional Info: Ver.Info - Type...........: Change: - Issue..........: JobMgr.Issue-1163 - Description....: Parthitory check redesigned. Now CheckBox check if in both Parthistory's the last 'save action' was done by the same save version. Also we check now if the Date/Time of Parthistory has a exactly differenc of 0[min] or 60[min] This is required because since NX8.0 we found differnces of exact 60[min] in Date/Time stamp. #Example: see in line 3-5 60[min] diff in line 6-7 0[min] diff. CheckBox.Data 1:[NX V4.0.4.2] |CheckBox.Data 2:[NX V8.0.3.4] ---------------------------------------------------------------------|---------------------------------------------------------------------- CliName.:@DB/041.231.104/C/master/ |CliName.:@DB/041.231.104/C/master/ PartHis.:~ |PartHis.:93 12 Nov 13 14:57 NT x64 infodba NX 8.0.3.4 - External User~ 1 PartHis.:92 12 Nov 13 13:44 NT Intel infodba NX 4.0.4.2 - External U~|PartHis.:92 27 Jun 13 12:07 NT x64 infodba NX 8.0.3.4 (NX Manager ref~ 2 PartHis.:91 16 Apr 13 03:33 NT Intel infodba NX 4.0.4.2 (NX Manager ~|PartHis.:91 16 Apr 13 04:33 NT Intel infodba NX 4.0.4.2 (NX Manager r~ 3 PartHis.:90 18 Apr 12 23:47 NT Intel nethh NX 4.0.4.2 |PartHis.:90 19 Apr 12 00:47 NT Intel nethh NX 4.0.4.2 4 PartHis.:89 20 Apr 12 10:33 NT Intel nethh NX 4.0.4.2 |PartHis.:89 20 Apr 12 11:33 NT Intel nethh NX 4.0.4.2 5 PartHis.:88 20 Apr 12 10:31 NT Intel nethh NX 4.0.4.2 |PartHis.:88 20 Apr 12 11:31 NT Intel nethh NX 4.0.4.2 6 PartHis.:87 02 Feb 09 17:00 NT Intel nethh NX 4.0.4.2 |PartHis.:87 02 Feb 09 17:00 NT Intel nethh NX 4.0.4.2 7 PartHis.:86 02 Feb 09 10:45 NT Intel sidlerc NX 4.0.4.2 |PartHis.:86 02 Feb 09 10:45 NT Intel sidlerc NX 4.0.4.2 === 10.11.2013 ============================================================================ - Version........: 2.1200 // J.Fes - Categorie......: Settings CheckBox - Additional Info: Check.Settings - Type...........: Change: - Issue..........: JobMgr.Issue-1160 - Description....: Methode to analyze difference of ModelData.MomentOfInertia is now based on comparing vector distance beween SolidBodyData1.MomentOfInertia and SolidBodyData2.MomentOfInertia. More Details please refer dokument: file://download.plmjobmanager.com/JobManagerV2/V2-0002-AppResources/90-DATA/CustomerNameShort_SettingsGlobal/10-JobScripts/CheckBox/Documentation.Application/CheckBox_02Analyse_JFES.pdf Page: Model Data: Comparing Moment Of Inertial #Hint: Before MomentOfInertia was analysed by checking XYZ differences. === 08.11.2013 ============================================================================ - Version........: 2.1200 // J.Fes - Categorie......: ObjectList - Additional Info: Ver.Info - Type...........: New: - Description....: Selection of Objects is now working together with the type of Objects you like to select and view in the JobServer 'Objects List'. JS:'Objects List' -> C.Typ (DS/IR/I) If IR or DS is selected then IR's are the base of the selection If I(tems) selected then from the list the items are parsed out and his is then the selection base for the items to view. === 06.11.2013 ============================================================================ - Version........: 2.1200 // J.Fes - Categorie......: JobControl - Additional Info: UpdDb=Yes - Type...........: New: - Description....: In JobControl Rules you can now defined for SelObjectsBy_ObjectSpecSelRule which Status the Incl.Object's may have to is includet in the JobPacket. Special Rules: If value is '=' or '' then the status is the same as defined in 'sel.O.P.Stat(N,M)' see: JobControl Rules field:'->Incl.P.Stat:' === 05.11.2013 ============================================================================ - Version........: 2.1200 // J.Fes - Categorie......: JCT - Additional Info: Ver.Info - Type...........: New: - Description....: New switch -MsgLog_DPNE #JobRoot_DP#\JCCmdToolMsg_Log.txt If this paramter is given then all messages printed by JC.CmdTools is appended to the given Message.log file. === 03.11.2013 ============================================================================ - Version........: 2.1200 // J.Fes - Categorie......: ObjectList - Additional Info: Ver.Info - Type...........: Change: - Description....: Data columes of Register 'Objects(DS/IRS)' renamed: Data colume: has Caption: ProcessResultMsg -> P.Res.Msg ProcessResultExtendedData -> P.Res.Msg.Ext.Data ProcessState -> P.Res.State ProcessResultCode -> P.Res.Code ProcessResultHasWarning -> P.Res.Has.WRN ProcessResultLink -> P.Res.Lnk === 31.10.2013 ============================================================================ - Version........: 2.1200 // S.Gueth - Categorie......: Settings CheckBox - Additional Info: Check.Settings - Type...........: New: - Description....: CheckBox Settings: define 'moment of inertia' result classifications === 30.10.2013 ============================================================================ - Version........: 2.1200 // J.Fes - Categorie......: ObjectList - Additional Info: Ver.Info - Type...........: New: - Description....: Object's can be searched via - Exported to Site - Last Export Date === 30.10.2013 ============================================================================ - Version........: 2.1200 // J.Fes - Categorie......: ObjectList - Additional Info: Ver.Info - Type...........: New: - Description....: Object's that has to be Exported can be searched via folowing conditions: O.Expo.Rec.Date defines the settings file for CBSettingsManager example 1: CBMgrConfig.xml (relative filename) example 2: c:\temp\CBMgrConfig.xml (filename with full path) === 16.10.2013 ============================================================================ - Version........: 2.1200 // J.Fes - Categorie......: Scripting - Additional Info: Ver.Info - Type...........: Change: - Description....: Code changes on Class Datasets_and_Irs_cls IrFromSiteID is replaced by ObjectFromSiteID === 15.10.2013 ============================================================================ - Version........: 2.1200 // A.Becker - Additional Info: UpdDb=No - Type...........: New: - Issue..........: JobMgr.Issue-1785 - Description....: Prepare TransportPaket serialized data as byte array before sending. The serialization process is time consuming. When done within the sending process, it has to be finished within the timeout while waiting for the StreamBeginMarker. This change enables the client to send KeepAlive packages to the server while serializing the data. Recommended values for the StreamBeginMarker Timeout are around 5-10 seconds now. === 15.10.2013 ============================================================================ - Version........: 2.1200 // A.Becker - Additional Info: UpdDb=No - Type...........: Change: - Issue..........: JobMgr.Issue-1785 - Description....: Optimized serialization/deserialization of TransportPaket instances. - Serialized byte array can be prepared, a following call of ToByteArray() will be satisfied from the previously generated data. - The serializing and compressing methods are optimized for lower memory usage (avoiding temporary byte array copies, using streaming instead). === 15.10.2013 ============================================================================ - Version........: 2.1200 // J.Fes - Categorie......: JobControl - Additional Info: UpdDb=Yes Ver.Info - Type...........: Change: - Description....: If a Job containd a JobPlaner Object then an Exception has been issued during creating a new Job. Problem is now fixed by code changes #Doc Info: !!! Update of JobManager Database is required !!! === 10.10.2013 ============================================================================ - Version........: 2.1200 // J.Fes - Categorie......: JobControl - Additional Info: UpdDb=Yes Ver.Info - Type...........: New: - Description....: JobObject Selection Methode extendet. Now you are able to select all specific DS Types of IR. Base of IR selection is DS. #Example: all UGMASTER + UPPART DS of IR. Base selection for IR is UGMASTER Dastaset Update of Database is required === 30.09.2013 ============================================================================ - Version........: 2.1200 // J.Fes - Categorie......: ObjectList - Additional Info: Ver.Info - Type...........: Change: - Description....: Colume: O.ReleaseState renamed to O.Rel.State Colume: O.ReleaseDate renamed to O.Rel.State.Date === 23.09.2013 ============================================================================ - Version........: 2.1200 // J.Fes - Categorie......: CheckBox - Additional Info: Ver.Info - Type...........: New: - Issue..........: JobMgr.Issue-1153 - Description....: Parsing and compairing Text conatains Symbols is now implemented. For this new conversion Rule is desinged Software now converts for Example: '10$s' to '10<$s>' behause until ~NX4 Symbols are written in value: '10$s' in newer Versions are written in this Syntax 10<$s> === 23.09.2013 ============================================================================ - Version........: 2.1200 // J.Fes - Categorie......: CheckBox - Additional Info: Ver.Info - Type...........: New: - Issue..........: JobMgr.Issue-1152 - Description....: Option: 'Attr_WithNoRef_AndBlankValue_etimate_as added' to CheckBox Now you can define how to estimate: defines how to estimate: Attributes that did not find a referenced Attribut (with same Name) and value is Blank - DiffReport_as_WRN: Differences will be reported as Waring. - DiffReport_as_ERR: Differences will be reported as Error (default). - DiffReport_NO....: Differences will NOT be reported. Nothing will be written to the report file. === 19.09.2013 ============================================================================ - Version........: 2.1200 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Type...........: New: - Description....: JobProcess Data data stored in JobData1ToProcess.xml file contains now: Data - if an Dataset is selected ir.pruid is filled in - if an Ir is selected Item.puid is filled in - if an Item is selected ir_puid is filled in #Example section from JobData1ToProcess.xml file: 55000000023803 A2 w3ANHjmRwD$ZRC BLND6R === 13.09.2013 ============================================================================ - Version........: 2.1200 // J.Fes - Categorie......: Install and Setup - Additional Info: Ver.Info - Type...........: New: - Description....: Type integration of i-deas / IdeasPart / IdeasAssembly / IdeasDrawing === 13.09.2013 ============================================================================ - Version........: 2.1200 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Type...........: Change: - Description....: In some cases JobStatus was wrong interpretet. Issue is now fixed by code changes. === 13.09.2013 ============================================================================ - Version........: 2.1200 // J.Fes - Categorie......: Import Sites/Data Import - Additional Info: Ver.Info - Type...........: Change: - Description....: if ObjectFs_SizeBytes is not readed then value is empty === 13.09.2013 ============================================================================ - Version........: 2.1200 // J.Fes - Categorie......: DB Import Sites/Data Import - Additional Info: Ver.Info - Type...........: Change: - Description....: Dataset ReleaseState and ReleaseDate was not written to JM.DB Problem is now fixed. === 13.09.2013 ============================================================================ - Version........: 2.1200 // J.Fes - Categorie......: GUI - Additional Info: Ver.Info - Type...........: Change: - Description....: JobServer Titel Version info changed to new format Syntax is now: VX.YYYY (Build:DD.MM.YYYY:[Build.Nr]) Example: V2.1200 (Build:12.09.2013:[5]) === 12.09.2013 ============================================================================ - Version........: 2.1200 // J.Fes - Categorie......: Admin - Additional Info: Ver.Info - Type...........: New: - Description....: if an Exception happend then debug information's contains now sourscode file name and sourcecode line number. With this info we get better information's to fix issues in PLMJobManager Software. === 20.08.2013 ============================================================================ - Version........: 2.1200 // J.Fes - Categorie......: Import Sites/Data Import - Additional Info: UpdDb=Yes Ver.Info - Type...........: New: - Description....: Information about export recordes is now avilable for Items Irs and Datasets === 19.08.2013 ============================================================================ - Version........: 2.1200 // J.Fes - Categorie......: DB Import Sites/Data Import - Additional Info: Ver.Info - Type...........: Doc: - Description....: Tritt ein SQL-Fehler beim lesen der Item Attribute aus der TC.DB auf dann wird die folgende Meldung ausgegben:'Err: Cannot Read Item Attribues ..' === 16.08.2013 ============================================================================ - Version........: 2.1200 // J.Fes - Categorie......: Import Sites/Data Import - Additional Info: UpdDb=Yes Ver.Info - Type...........: New: - Description....: Import of DataClass 'Item' now avialble === 12.08.2013 ============================================================================ - Version........: 2.1199 // J.Fes - Categorie......: Import Sites/Data Import - Additional Info: Ver.Info - Type...........: Change: - Description....: In Sites/Data colume 'note' is now a multiline cell === 09.08.2013 ============================================================================ - Version........: 2.1199 // J.Fes - Categorie......: ObjectJobResults - Additional Info: Ver.Info - Type...........: New: - Description....: JobLink support's now direct access to JobLog Files Therefor a new syntax is desinged: #JobLog_lnk#\JobLog_PP\File_NE | | |-> File in JobLog | |-> parcial path in JobLog |-> definition for use of internal Link to JobLog.zip file === 19.07.2013 ============================================================================ - Version........: 2.1199 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Type...........: New: - Description....: New Option JobControl.ObjectSpecialSelectRule 'DS.all of IR (TC DataSets)' This Option can be used in JobControl Object Selection to select all Dataset's of Item Revision === 17.07.2013 ============================================================================ - Version........: 2.1199 // J.Fes - Categorie......: GUI Settings - Additional Info: Ver.Info - Type...........: Change: - Description....: If settings are updated that relevant for the GUI are now directly updated. === 08.07.2013 ============================================================================ - Version........: 2.1198 // S.Gueth - Categorie......: JCT - Type...........: New: - Description....: function to extract the refile objects into the input lists, seperated by OwningS and replica objects === 04.07.2013 ============================================================================ - Version........: 2.1198 // J.Fes - Categorie......: Import Sites/Data Import - Additional Info: Ver.Info - Type...........: Change: - Description....: if file system is a unix file system now correct path to the volume file is imported === 04.07.2013 ============================================================================ - Version........: 2.1198 // J.Fes - Categorie......: Import Sites/Data Import - Additional Info: Ver.Info - Type...........: Change: - Description....: if file system is a unix file system now correct path to the volume file is imported === 03.07.2013 ============================================================================ - Version........: 2.1198 // J.Fes - Categorie......: ObjectList - Additional Info: Ver.Info - Type...........: Change: - Description....: On function Objects (DS/IRS) -> Extra View all Data of Assembly if more then one IR was requested. Statistic of Bom struture was wrong because . because Data of 'components total' and 'components different' was added by eatch analysed IR It is now fixed. === 27.06.2013 ============================================================================ - Version........: 2.1198 // J.Fes - Categorie......: JCT CheckBox - Additional Info: Ver.Info - Type...........: Change: - Description....: if prepare.exe is used for converting .cgm to .tif and the files are located in UNC pathes then JCT replaces '\\' true '//' Reason ist that prepare.exe do handels unc pathes wrong. === 27.06.2013 ============================================================================ - Version........: 2.1198 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Type...........: Change: - Description....: If JobClient is in TestMode only JobRules are used that starts with 'T' as P.Status selection criteria. All JobContol.Rules that do !!-NOT-!! starts with P.Status = 'T' are skipped. === 24.06.2013 ============================================================================ - Version........: 2.1198 // J.Fes - Categorie......: CommandLineArgs - Additional Info: Ver.Info - Type...........: New: - Description....: -action IrInfoResolve_2011_06 updated it is now working again === 22.06.2013 ============================================================================ - Version........: 2.1198 // J.Fes - Categorie......: DB JobControl - Additional Info: Ver.Info - Type...........: Change: - Description....: Analyse of Refile extracts now additonal infos from _failed_refiles.log if more then one Line was written in _failed_refiles.log. Example: Content of _failed_refiles.log: @DB/66047700/A # Returned error-code: 100000023 - while saving data to Teamcenter: Cannot find related object IRM (in IRM.PLME_string_02) on ??? of class ??? (tag 00000000) P.ResultMsg returns now: while saving data to Teamcenter: Cannot find related object IRM (in IRM.PLME_string_02) on ??? of class ??? (tag 00000000) === 18.06.2013 ============================================================================ - Version........: 2.1198 // J.Fes - Categorie......: CheckBox - Additional Info: Ver.Info - Type...........: Change: - Description....: ProcessResultCode changed from: 'CBExtr-12' to: 'CBExtr-91' If exception happend during anlyse Objects Result code === 18.06.2013 ============================================================================ - Version........: 2.1198 // J.Fes - Categorie......: CheckBox - Additional Info: Ver.Info - Type...........: Change: - Description....: CB.Extract Data new ProcessResult Section [SAVE:xx] / 'CBExtr-12' added Data are returned if CB Options -SaveWorkPart was active during CheckBox data extraction === 26.05.2013 ============================================================================ - Version........: 2.1198 // J.Fes - Categorie......: JCT - Additional Info: Ver.Info - Type...........: Change: - Issue..........: JobMgr.Issue-1129 - Description....: If no CB.Results during CB.extraction was written to zzCBExport_Result.csv file then Evaluation of results have not been proccesed. Problem is now fixed. === 22.05.2013 ============================================================================ - Version........: 2.1196 // S.Gueth - Categorie......: Settings CheckBox - Additional Info: Check.Settings - Type...........: New: - Description....: New in CheckBox Settings: PPM_Deviation_AsWarning defines the max deviation, until the drawing compare is estimated as a warning, default is 100 === 21.05.2013 ============================================================================ - Version........: 2.1198 // J.Fes - Categorie......: CheckBox - Additional Info: Ver.Info - Issue..........: JobMgr.Issue-1129 - Description....: CheckBox.Extract: Improvments to contol reprocessing parts If 'more then one Part' in JobPaket the folowing result data wil be returned: | |-> 'First part' that has NO CB Results then following resultdata is returned: | | - J.ResCode:-1 | | - J.ResMsg:'NO CB Data extracted for this part. Hint:Try get data via 1by1 Job.' | | - Redo use Rule [RuleID=AutoRedo1] [O.Type=*] [J.ResCode=-1] [J.ResMsg=*] [J.ResWarn=*] [P.Stat=RUN1] | |-> 'Part after first part' that has NO CB Results then following resultdata is returned: | - J.ResCode:CBExtr-01 | - J.ResMsg:'NO CB Data extracted for this part. Hint:Try get data via standard Job.' | - Redo use Rule [RuleID=AutoRedo] [O.Type=*] [J.ResCode=CBExtr-01] [J.ResMsg=*] [J.ResWarn=*] [P.Stat={PreState}] If 'Only one Part' in JobPaket then following resultdata is returned: | |-> 'First Object' that has NO CB Results get resultdata: | | - J.ResCode:CBExtr-13 | | - J.ResMsg:'NO CB Data extracted for this part. Hint:Extrac data in 1by1 Job dit not worked please Check Error Reason.' This Info replaces ApplWhatsNew :2.119514.03.2013 === 21.05.2013 ============================================================================ - Version........: 2.1198 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Type...........: Change: - Issue..........: JobMgr.Issue-1130 - Description....: JobResults of GenericJobResultsV2 (JobData2Result.xml) is now imported bevor JobResults of GenericJobResultsV1 (*JobResultsGenericV1.Log) is imported. === 16.05.2013 ============================================================================ - Version........: 2.1198 // J.Fes - Categorie......: CheckBox - Additional Info: Ver.Info - Type...........: Change: - Description....: Refdata not found was wrong assinged in case if CB1.NXVersion was CB2.NXVersion. Problem is now fixed. === 03.05.2013 ============================================================================ - Version........: 2.1196 // J.Fes - Categorie......: DB Import Sites/Data Import - Additional Info: Ver.Info - Type...........: Doc: - Description....: During manuell TC: IR/DS import JS Checks now - if IR still contains: 'UGPART Dataset' and 'UG FileObject' in named references. - of no 'UGPART Dataset' and 'UG FileObject' in IR then JM removes IR and Dataset's from JM.DB. === 19.04.2013 ============================================================================ - Version........: 2.1196 // S.Gueth - Categorie......: Settings JCT CheckBox - Type...........: New: - Issue..........: JobMgr.Issue-123 - Description....: CheckBox Settings: CBCmdProgDefs List of all CB Program definitions, which will be executed, if some image files are selected and the compare button is pressed Extention.: extention of the file, for that the program will be executed CmdProg...: full path to the program file CmdDefDir.: directory in which the program should be executed, you can set this directory in the options with #File_DP# CmdOptions: arguments for the program, the selected files you can set with: #File1_DPNE# #File2_DPNE# #File3_DPNE# ... === 18.04.2013 ============================================================================ - Version........: 2.1196 // J.Fes - Categorie......: CheckBox - Additional Info: Ver.Info - Type...........: New: - Issue..........: JobMgr.Issue-25 - Description....: After NX.CB extract data now CB.CMD Tools reading form NX.syslog the used NX Version information and transfers this data to process result Colume: 'P.Used.Prg.Vers' Example: P.Used.Prg.Vers......: [Extr.CADv:NX 6.0.2.8 MP13, 21Apr11][Extr.CBv:V2.0.1.5(NX7.5ff)][Extr.CAD.FILEv:NX V4.0.1] === 18.04.2013 ============================================================================ - Version........: 2.1196 // J.Fes - Categorie......: Settings CheckBox - Additional Info: Check.Settings - Type...........: New: - Description....: CB.Tools uses Environvariable %NxCheckBox_JobPara% to transfer used CheckBox Parameter to Process Colume:'P.CMDLine' === 18.04.2013 ============================================================================ - Version........: 2.1196 // J.Fes - Categorie......: CheckBox - Additional Info: Ver.Info - Type...........: New: - Issue..........: JobMgr.Issue-25 - Description....: CB.Compair Result now assembels used process version infos and transfers this data to process result Colume: 'P.Used.Prg.Vers' Example: P.Used.Prg.Vers: [Extr1.CADv:NX V7.5.1.5][Extr1.CBv:V2.0.1.5(NX7.5ff)][Extr1.CAD.FILEv:NX V7.5.1.5] extract 1:|-> Used.NX Ver. |-> Used.NxCB. Ver |-> Vers. of CAD.Files(was last saved) [Extr2.CADv:NX V7.5.1.5][Extr2.CBv:V2.0.1.5(NX7.5ff)][Extr2.CAD.FILEv:NX V7.5.1.5] extract 2:|-> Used.NX Ver. |-> Used.NxCB. Ver |-> Vers. of CAD.Files(was last saved) [Comp.JM.CBCv:V2013-04-21.01] for CheckBox Compair:|-> Used JobManager CheckBox Compair Version (CBCv) === 17.04.2013 ============================================================================ - Version........: 2.1196 // J.Fes - Categorie......: DB Import Sites/Data Import - Additional Info: Ver.Info - Type...........: Change: - Description....: Tab: 'Sites/Data Import' Colume names renamed Names are now strutured by group: - Site........: SiteID/Descrption - IContr......: settings for Import Control like: 'DateModBegin' 'Update force' - Org-Info....: Org Info's - Setup-DB....: settings for Setup DB access like: DB.Provider (Ora/Mssql) .. - Setup-Imp...: settings for Import Conditions like Setup-Imp:Tc-Prj.Data - Setup-Native: settings for Setup a Native Site definition === 16.04.2013 ============================================================================ - Version........: 2.1196 // S.Gueth - Categorie......: Import JCT - Type...........: New: - Description....: DataShare new parameters: -ImportUpdateListDir_DP -TCSiteId if they are set, the ImportUpdateList txt file for successfully processed items will be created === 11.04.2013 ============================================================================ - Version........: 2.1196 // J.Fes - Categorie......: CheckBox - Additional Info: Ver.Info - Type...........: Change: - Description....: Analysing of text containing relationships improved. now text containing relations attends replace rule from:' to === 05.04.2013 ============================================================================ - Version........: 2.1196 // J.Fes - Categorie......: Settings CheckBox - Additional Info: Check.Settings - Type...........: Change: - Description....: Setting Renamed from: ModelBodysCheck_Methode to: Zeile 2 === 04.04.2013 ============================================================================ - Version........: 2.1196 // J.Fes - Categorie......: CheckBox - Additional Info: Ver.Info - Type...........: Change: - Description....: Entity 25 26 comparation infos contains now new Location info's contains now new Location info's : Location..:[Sheet:SX@166/View:ETAIL H] === 04.04.2013 ============================================================================ - Version........: 2.1196 // J.Fes - Categorie......: CheckBox - Additional Info: Ver.Info - Type...........: Change: - Issue..........: JobMgr.Issue-113 - Description....: JobMgr.Issue-113 CB: EN25 and EN26 ViewDependent Infos add to Info Object === 02.04.2013 ============================================================================ - Version........: 2.1196 // S.Gueth - Categorie......: ObjectJobResults Settings CheckBox - Type...........: New: - Description....: If you click on J.Link and the result file is a valid checkbox result file, the CbSettingsManager will be opend with the current result === 01.04.2013 ============================================================================ - Version........: 2.1196 // J.Fes - Categorie......: Import Sites/Data Import - Additional Info: UpdDb=Yes Ver.Info - Type...........: New: - Description....: Import of Project Data for Item / ItemRev / Datasets avilable. === 29.03.2013 ============================================================================ - Version........: 2.1196 // J.Fes - Categorie......: JobControl Settings - Additional Info: Ver.Info Check.Settings - Type...........: New: - Description....: Gitter Variablen erweitert es stehen jetzt folgende Variablen zur verfügung -#JobObjectsN# = defined Object per Packet for this Job -#JobObjectApSumMax# = defined max Summe of AP Comp. for this Job === 29.03.2013 ============================================================================ - Version........: 2.1197 // J.Fes - Categorie......: Install and Setup Settings CheckBox - Additional Info: Ver.Info - Type...........: Change: - Description....: In JobServer Settings Mananger JobServer -> Extra -> Setup -> Tab:CheckBox !! is removed !! Please remind: CheckBox settings are now managed with external tool: 91-CheckBox (Settings and Compair Tool) You can start the new tool via _JobManager Toolbar: - _JobManagerV2 -> 91-TestSystem -> 91-CheckBox (Settings and Compair Tool) --- Or --- - _JobManagerV2 -> 91-ProdSystem -> 91-CheckBox (Settings and Compair Tool) === 28.03.2013 ============================================================================ - Version........: 2.1196 // J.Fes - Categorie......: CheckBox - Additional Info: Ver.Info - Type...........: Change: - Issue..........: JobMgr.Issue-110 - Description....: IssueJobMgr.Issue-110: Problem to find matching text for Entity 25/25 Text's is now solved === 27.03.2013 ============================================================================ - Version........: 2.1196 // J.Fes - Categorie......: ObjectList Settings - Additional Info: Check.Settings - Type...........: Change: - Description....: If clicking JobServer ObjectList button J.Link then now Explorer starts with the directory of the linkfile and the linkfile will be selected The new Explorer window will get into forground. === 26.03.2013 ============================================================================ - Version........: 2.1196 // S.Gueth - Categorie......: JCT CheckBox - Type...........: Change: - Description....: result message was updated if there is no cgm to tif program it displays: [DC:ERR:CgmToTif Conver.Prg (%UGII_BASE_DIR%\NXPLOT\cgm2tiff.exe) Not Found] === 25.03.2013 ============================================================================ - Version........: 2.1195 // J.Fes - Categorie......: CheckBox - Additional Info: Ver.Info - Type...........: New: - Description....: ModelData.SolidBodyCheck Analyse of section PrototyeAnalysis integreted. Now comparing 'SolidBodies' consitensy is avilable === 20.03.2013 ============================================================================ - Version........: 2.1195 // S.Gueth - Categorie......: JCT - Type...........: Change: - Description....: Result message parsing for DataShare was improved --> errors like MB:SUCCESS where removed, not it is only SUCCESS === 14.03.2013 ============================================================================ - Version........: 2.1195 // J.Fes - Categorie......: CheckBox - Additional Info: Ver.Info - Description....: CheckBox.Extract: Analyse 'Part loading' Sequenz [PL:] improved === 11.03.2013 ============================================================================ - Version........: 2.1195 // J.Fes - Categorie......: JCT CheckBox - Additional Info: Ver.Info - Type...........: New: - Description....: defines EntitisType25 SubTypes ignor list. All listed EntitisType25 SubTypes 'Ent25.Subtype(#Number#)' will -!!NOT!!- be compared [Default=List is empty] [Example:6 = UF_draft_crosshatch_subtype] === 07.03.2013 ============================================================================ - Version........: 2.1195 // J.Fes - Categorie......: DB Import Sites/Data Import - Additional Info: Ver.Info - Type...........: Change: - Description....: SiteData 'DataSync' checks now if ItemId or RevId has changed. If yes data in JM.DB will be updatet. === 07.03.2013 ============================================================================ - Version........: 2.1195 // J.Fes - Categorie......: DB Import Settings - Additional Info: Check.Settings - Type...........: Change: - Description....: It is now possible to use SyncSiteData during sync TC.DB and JM.DB via TaskSheduler task. to use this please add in Task.Job parameter /SyncSiteData=true === 04.03.2013 ============================================================================ - Version........: 2.1194 // S.Gueth - Categorie......: JCT - Type...........: New: - Description....: sub ParseDataShareCmdOutputLogFile: to parse the cmd output logfile after the datashare process === 04.03.2013 ============================================================================ - Version........: 2.1194 // S.Gueth - Categorie......: JCT - Type...........: New: - Description....: Neue Klassen CmdOutputParseObjects_cls und CmdOutputParseObject_cls, zum Parsen für das Data Share Output log === 04.03.2013 ============================================================================ - Version........: 2.1194 // S.Gueth - Categorie......: JCT CheckBox - Type...........: New: - Description....: CheckBox extract returns now Error Codes per section Section: P.ResultMsg P.Res.Code P.ERR..: NO CB.Data extracted.: CBExtr-01 PL.....: Loading Part.........: CBExtr-02 UF.....: Update: All Features.: CBExtr-03 UD.....: Update: Drawing views: CBExtr-04 PH.....: Part Header Section..: CBExtr-05 MD.....: Model Section........: CBExtr-06 AS.....: Assembly Section.....: CBExtr-07 DR.....: Drawing Section......: CBExtr-08 EN.....: Entities Section.....: CBExtr-09 CBxml..: write Section........: CBExtr-10 CGM....: Gen CGM File.........: CBExtr-11 Save...: Save Part............: CBExtr-12 === 04.03.2013 ============================================================================ - Version........: 2.1194 // S.Gueth - Categorie......: CheckBox - Type...........: Change: - Description....: Error happend during NxCheckBoxExtract LogFile (-CBPara_Log) Parsing. Index was greater then List Index problem fixed. === 04.03.2013 ============================================================================ - Version........: 2.1194 // J.Fes - Categorie......: Settings CheckBox - Additional Info: Ver.Info Check.Settings - Type...........: New: - Description....: It is now posible to add to CheckBox Debug Messages into CheckBox Compair-Report see CheckBox.settings.DebugDetailsToCheckBoxCompairReport - if Value True:add Debugs to CheckBox Compair-Report - if Value False:NO Debugs in CheckBox Compair-Report - Default Value=False === 04.03.2013 ============================================================================ - Version........: 2.1194 // J.Fes - Categorie......: CheckBox - Additional Info: Ver.Info - Type...........: Change: - Description....: If Txt.LTZ Then 'Leading or Trailing Zeros' in Entity25 or Entity26 Text is found then Information is now add to section:[PI] Part Information. === 04.03.2013 ============================================================================ - Version........: 2.1194 // J.Fes - Categorie......: CheckBox - Additional Info: Ver.Info - Type...........: Doc: - Description....: - If using for TextCompairMethod = RemoveLeadingTrailingZeros. Rule Results will be add to PartInfo section - If using for TextCompairMethod = AsText Rule Results will be add to Ent25/Ent26 section === 01.03.2013 ============================================================================ - Version........: 2.1194 // J.Fes - Categorie......: Settings CheckBox - Additional Info: Ver.Info Check.Settings - Type...........: Change: - Description....: Methode of comparing Entity25 and Entity25 redesigned. Now eatch TextBlock ist checked. LTZeros compensating is implementet. LTZeros = Leading / Traling Zeros compensating during comparing text. === 28.02.2013 ============================================================================ - Version........: 2.1194 // J.Fes - Categorie......: Reports CheckBox - Additional Info: Ver.Info - Type...........: Change: - Description....: TextAngel Values are now printet in CB Reports in degree units. === 25.02.2013 ============================================================================ - Version........: 2.1194 // J.Fes - Categorie......: CheckBox - Additional Info: Ver.Info - Type...........: Doc: - Description....: TextCompair Entity 25 + 26 Information Text #CompRefId_ReplByJMCB# Removed === 19.02.2013 ============================================================================ - Version........: 2.1194 // S.Gueth - Categorie......: JCT - Type...........: New: - Description....: SubAction of 'TcMultiSite_2012_02' eingefügt === 19.02.2013 ============================================================================ - Version........: 2.1194 // S.Gueth - Categorie......: JCT - Type...........: New: - Description....: -Action 'TcDataSync_2012_02' wurde in 'TcMultiSite_2012_12' umbenannt === 19.02.2013 ============================================================================ - Version........: 2.1194 // J.Fes - Categorie......: JobControl Settings - Additional Info: Ver.Info Check.Settings - Type...........: New: - Description....: In Custom Process Status definitions you are now able to define custom results for: [P.ResCode=??] [P.ResMsg=??] [P.ResWarn=1/0] [P.ResLink=Info..] === 18.02.2013 ============================================================================ - Version........: 2.1194 // J.Fes - Categorie......: GUI ObjectList Settings - Additional Info: Ver.Info Check.Settings - Description....: In JobServer Settings you can define if Datarows of Multisite/Replica Objects listet in Register: 'Objects List' datagrid will be colored. === 15.02.2013 ============================================================================ - Version........: 2.1194 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Type...........: New: - Description....: If JobClient is running in 'Debug' or 'Test' or 'DebugTest' Mode only '1' Job will be send to JobClient. This special rule prevents that during testings the user will be disturbed by getting other new Jobs. === 14.02.2013 ============================================================================ - Version........: 2.1194 // J.Fes - Categorie......: GUI - Additional Info: Ver.Info - Type...........: New: - Description....: Datagrid filter cell backcolor is set to gold if a filter value is aktive. === 08.02.2013 ============================================================================ - Version........: 2.1194 // S.Gueth - Categorie......: Settings CheckBox - Additional Info: Check.Settings - Type...........: New: - Description....: neues CheckBox Setting in Attributen 'Attr_value_compare_as_number_list' Die Atrribute werden darauf getestet, ob beide Values in einen Numerischen Wert geparst werden können, wenn das zutrifft, dann werden diese via Double Values verglichen, ansonsten werden diese als via strings verglichen. === 05.02.2013 ============================================================================ - Version........: 2.1194 // S.Gueth - Categorie......: Settings CheckBox - Additional Info: Check.Settings === 30.01.2013 ============================================================================ - Version........: 2.1194 // S.Gueth - Categorie......: CheckBox - Type...........: New: - Description....: neue Paramenter für den Checkboxvergleich, um die Beschreibung im div.txt File anzupassen, wenn 2 Verschiedene Teile verglichen werden Cb1DescShort, Cb1DescFull, Cb2DescShort, Cb2DescFull, CbReportDesc === 30.01.2013 ============================================================================ - Version........: 2.1194 // S.Gueth - Categorie......: GUI Settings - Additional Info: Check.Settings - Type...........: New: - Description....: Property: JobServer_WorkInstanceForeColor to set Text fore color of JobServer === 28.01.2013 ============================================================================ - Version........: 2.1194 // J.Fes - Categorie......: JCT - Additional Info: Ver.Info - Type...........: Change: - Description....: -RecToAdd -RecCcAdd -RecBcAdd accepts user list Example: Firstname1.Name1@Company.com##Firstname1 Name1Firstname2.Name2@Company.com##Firstname2 Name2 === 23.01.2013 ============================================================================ - Version........: 2.1194 // S.Gueth - Categorie......: GUI - Type...........: New: - Description....: New Key-Action for JobClient: B = Break current JobServer connection === 22.01.2013 ============================================================================ - Version........: 2.1194 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Type...........: Doc: - Description....: if refile result file is not found Result is estimatet as R.Code=64 and R.Msg='Refiled Part File not found' === 22.01.2013 ============================================================================ - Version........: 2.1194 // S.Gueth - Categorie......: CheckBox - Description....: Result Message für das Auswerten des CBExtract Logs wurde angepasst. Beispiel: [PH:OK][MD:WRN:CB (NO error text found for error 96)][AS:OK][DR:OK][EN:OK] WRN wird ausgegeben wenn die Section abgeschlossen ist, aber einen Fehler enthält, oder wenn die Section einen Fehler enthält und die CB.xml dennoch richtig geschrieben werden konnte. ERR wird ausgegeben wenn die Section nicht richtig abgeschlossen wurde und das CB.xml nicht richtig geschrieben werden konnte. Wenn eine Section nicht vorhanden ist, dann wird diese auch nicht ausgegeben. === 22.01.2013 ============================================================================ - Version........: 2.1193 // S.Gueth - Categorie......: CheckBox - Type...........: New: - Description....: In Checkboxsettings wurde die Option 'Density_is_0_AsErr' hinzugefügt. Diese gibt an, ob eine density = 0 als Fehler oder als Warnung gewertet werden soll. (Default is Fehler) === 22.01.2013 ============================================================================ - Version........: 2.1193 // S.Gueth - Categorie......: CheckBox - Type...........: Change: - Description....: Ausgabeformat der Short Message wurde geändert: vorher: [MD:8 Msg:ERR:Vol] jetzt: [MD:ERR:Vol] Beispiel: [PH:OK][MD:ERR:Vol][AS:OK][DR:OK][EN25:OK][EN26:OK][DC:not.Proc][PF:OK][PI:WRN:MD:Density=0] === 21.01.2013 ============================================================================ - Version........: 2.1193 // S.Gueth - Categorie......: CheckBox - Type...........: New: - Description....: Section Part Information eingeführt === 16.01.2013 ============================================================================ - Version........: 2.1193 // S.Gueth - Categorie......: JobControl - Type...........: New: - Description....: subaction: 'compair2XmlFiles' compairs 2 XML Files === 15.01.2013 ============================================================================ - Version........: 2.1193 // J.Fes - Type...........: New: - Description....: In den settings können jetzt die Pfade zu den OracleClientBin_Path Verzeichnissen angegeben werden. === 18.12.2012 ============================================================================ - Version........: 2.1190 // J.Fes - Categorie......: Settings CheckBox - Additional Info: Ver.Info Check.Settings - Type...........: New: - Description....: Unterscheidung der Entity eingeführt für: -EN25: 'Entity Data 25:Drafting' -EN26: 'Entity Data 26:Dimensions' === 18.12.2012 ============================================================================ - Version........: 2.1189 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Description....: Gitter Variablen erweitert es stehen jetzt folgende Variablen zur verfügung -#JobDef.JobPacket_ObjectCount# -#JobDef.JobPacket_ObjectCountDesired# === 14.12.2012 ============================================================================ - Version........: 2.1185 // J.Fes - Categorie......: DB CheckBox - Additional Info: Ver.Info - Type...........: Doc: - Description....: Text Value Parser erweitert es wird aus - Example 1: NX8:'' -> bis NX7.5:'' - Example 2: NX8:'' -> NX6:'' Durch diese Anpassung wird gewärleistet das Texte die Refferenzen beinhalten und von den Versionen <=NX7.5 und von verglichen werden koennen === 02.12.2012 ============================================================================ - Version........: 2.1176 // S.Gueth - Categorie......: JobControl - Type...........: New: - Description....: === 24.11.2012 ============================================================================ - Version........: 2.1169 // J.Fes - Categorie......: CheckBox - Additional Info: Ver.Info - Type...........: Change: - Description....: if Drawing Compair was not processed short value is: not.Proc === 24.11.2012 ============================================================================ - Version........: 2.1169 // J.Fes - Categorie......: CheckBox - Additional Info: Ver.Info - Type...........: Change: - Description....: CheckBox Report contains now section lines. This lines helps to get better overview in CB Report File. === 24.11.2012 ============================================================================ - Version........: 2.1169 // J.Fes - Categorie......: Settings CheckBox - Additional Info: Ver.Info Check.Settings - Type...........: New: - Description....: Entities 25 UG_Darfting comparing added to CheckBox Compair. === 20.11.2012 ============================================================================ - Version........: 2.1166 // J.Fes - Categorie......: JobControl - Type...........: New: - Description....: CB_GeometricCompare_cls === 16.11.2012 ============================================================================ - Version........: 2.1164 // J.Fes - Categorie......: JCT CheckBox - Additional Info: Ver.Info - Type...........: Change: - Description....: if Option -CBImageGenRule=Always is set the also the .tif files will be created new from .cgm files === 15.11.2012 ============================================================================ - Version........: 2.1162 // J.Fes - Categorie......: Settings CheckBox - Type...........: New: - Description....: in CheckBox Settings you can disable the Check Of ViewAnchorPoints === 14.11.2012 ============================================================================ - Version........: 2.1159 // J.Fes - Categorie......: CheckBox - Additional Info: UpdDb=No Ver.Info - Type...........: New: - Description....: funtion to read CheckBox Results from CheckBox LogFile === 14.11.2012 ============================================================================ - Version........: 2.1159 // J.Fes - Categorie......: Settings CheckBox - Additional Info: Ver.Info Check.Settings - Type...........: New: - Description....: Methode CLAs_Obj.TifMergCopyToTifMergCollectionIfPPMgt Avilable === 14.11.2012 ============================================================================ - Version........: 2.1159 // J.Fes - Categorie......: CheckBox - Additional Info: UpdDb=No Ver.Info - Type...........: New: - Description....: funtion to read CheckBox Results from CheckBox LogFile === 14.11.2012 ============================================================================ - Version........: 2.1159 // J.Fes - Categorie......: Settings CheckBox - Additional Info: Ver.Info Check.Settings - Type...........: New: - Description....: Methode CLAs_Obj.TifMergCopyToTifMergCollectionIfPPMgt Avilable === 09.11.2012 ============================================================================ - Version........: 2.1154 // J.Fes - Categorie......: CheckBox - Additional Info: Ver.Info - Type...........: New: - Description....: Checking if Resets containing a valid volume. === 02.11.2012 ============================================================================ - Version........: 2.1149 // J.Fes - Categorie......: Settings CheckBox - Additional Info: Ver.Info Check.Settings - Description....: Check:'ViewDependentObj' disablet by default (Result of CB.Meeting 6.11.2012) === 02.11.2012 ============================================================================ - Version........: 2.1149 // J.Fes - Categorie......: Settings - Additional Info: Ver.Info Check.Settings - Description....: Check:'LayerObjects_n' disablet by default (Result of CB.Meeting 6.11.2012) === 02.11.2012 ============================================================================ - Version........: 2.1149 // J.Fes - Categorie......: Settings - Additional Info: Ver.Info Check.Settings - Description....: Check:'ObjectsWire_n' disablet by default (Result of CB.Meeting 6.11.2012) === 31.10.2012 ============================================================================ - Version........: 2.1145 // S.Gueth - Type...........: New: Change: - Description....: 2.118511.12.2012S.Gueth: #Change: added clip funktionality if the tif size is different === 31.10.2012 ============================================================================ - Version........: 2.1145 // S.Gueth - Categorie......: JobControl - Type...........: New: - Description....: function GetPPMFromPicture === 31.10.2012 ============================================================================ - Version........: 2.1145 // S.Gueth - Categorie......: JobControl - Type...........: New: - Description....: sub CutTifIfDifferent === 31.10.2012 ============================================================================ - Version........: 2.1145 // S.Gueth - Type...........: New: - Description....: Sub CBMakeMergeTifandGetPPMValue === 29.10.2012 ============================================================================ - Version........: 2.1141 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Type...........: New: - Description....: Option -JobMgrDataOrg_BaseNameSchema RootPP1_N=CustomPP1_N verfügbar. === 12.10.2012 ============================================================================ - Version........: 2.1131 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Type...........: Change: - Description....: ProcessTimeStart ProcessTimeEnd umgestellt von Minuten genau auf Sekunden genau. Hierdurch wird jetzt der 'last process' Ergebnis richtig ermittelt. Zuvor ist es vorgekommen das wenn processe inherhalb der selben Minute ein object verarbeitet hat das das vorherige Ergebniss (und nicht das wirklich letzte) als 'last processed' ermittelt wurde. === 12.10.2012 ============================================================================ - Version........: 2.1131 // J.Fes - Categorie......: JobControl - Additional Info: UpdDb=Yes - Type...........: New: Doc: - Description....: If Value>0 then this Rule is aktive === 12.10.2012 ============================================================================ - Version........: 2.1131 // J.Fes - Categorie......: JobControl - Additional Info: UpdDb=Yes - Type...........: New: - Description....: JobPaket size control extendet with selections method:'sel:O.Status' This settings defines selectin definition for Objects with Status #New:[31.10.2011 J.Fes] If Value=empty then this Rule is Inaktive. If Vaule='' (2 >'< Chars) === 12.10.2012 ============================================================================ - Version........: 2.1131 // J.Fes - Categorie......: JobControl - Additional Info: UpdDb=Yes - Type...........: New: - Description....: JobPaket contains only Objektes of diffrent Items. === 12.10.2012 ============================================================================ - Version........: 2.1131 // J.Fes - Categorie......: JobControl - Additional Info: UpdDb=Yes - Type...........: New: - Description....: JobPaket contains only Objektes of diffrent ItemRev. === 12.10.2012 ============================================================================ - Version........: 2.1131 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Type...........: Doc: - Description....: Beim Anlegen von JobRules werden die Daten der JobScripts für JobName + JobDescription automaisch übernommen wenn zuerst die JobScripts ausgewählt werden und dann gleich die neue JobRule gepeichert wird. Der JobName wird erstellt aus: JobScriptName_0n Die Speicherung der neuen JobRule wird ausgeführt wenn in eine andere Zeile des Datagrids geklickt wird. === 12.10.2012 ============================================================================ - Version........: 2.1131 // J.Fes - Categorie......: Import Sites/Data Import - Additional Info: Ver.Info - Type...........: Change: - Description....: IrCreateDate IrLastModDate + ObjectCreateDate umgestellt von Minuten genau auf Sekunden genau. === 09.10.2012 ============================================================================ - Version........: 2.1128 // J.Fes - Categorie......: Settings CheckBox - Additional Info: Ver.Info Check.Settings - Type...........: New: - Description....: Auswertung der Performance Daten können aus und eingeschaltet werden. Default = Aus === 09.10.2012 ============================================================================ - Version........: 2.1128 // J.Fes - Categorie......: Settings CheckBox - Additional Info: Ver.Info Check.Settings - Type...........: Change: - Description....: New setting to control LayerObjects_n_DeviationMax. === 18.09.2012 ============================================================================ - Version........: 2.1124 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Type...........: Change: - Description....: NX8 Refile format of -out=%RfFailedLog_DPNE% changed. Old Key 'ERR.Code:' changed to 'error-code:' === 13.09.2012 ============================================================================ - Version........: 2.1116 // J.Fes - Categorie......: Settings CheckBox - Additional Info: Check.Settings - Type...........: Change: - Description....: Compair Checks now with setting: Settings_Obj.AliveFeatures_n_DeviationMax === 13.09.2012 ============================================================================ - Version........: 2.1116 // J.Fes - Categorie......: Settings CheckBox - Additional Info: Check.Settings - Type...........: Change: - Description....: Compair Checks now with setting: Settings_Obj.TotalFeatures_n_DeviationMax === 30.08.2012 ============================================================================ - Version........: 2.1114 // J.Fes - Categorie......: CheckBox - Additional Info: Ver.Info - Type...........: Change: - Description....: If diretory name ends with '.' 'it will be replaced by '_x'. Tis is required to prevent errors on file-directory system. Example: S:\CBArchv\TCSite\Test.\ItemId\RevId\ -> S:\CBArchv\TCSite\Test_x\ItemId\RevId\ === 30.08.2012 ============================================================================ - Version........: 2.1114 // J.Fes - Categorie......: CheckBox - Additional Info: Ver.Info - Type...........: Change: - Description....: Names of CheckBox Data Results changed _3Merge->_1Merge _1Dif.tif -> _3Dif _2DifHistoDat -> _3DifHistoDat === 30.08.2012 ============================================================================ - Version........: 2.1114 // J.Fes - Categorie......: CheckBox - Additional Info: Ver.Info - Type...........: Change: - Description....: Names of CheckBox Data Results changed _3Merge->_1Merge _1Dif.tif -> _3Dif _2DifHistoDat -> _3DifHistoDat === 27.08.2012 ============================================================================ - Version........: 2.1112 // J.Fes - Categorie......: Settings CheckBox - Additional Info: Ver.Info Check.Settings - Type...........: New: - Description....: new CB Setting: defines if 'ViewAnchorX.Y.Z' values not listed in NX8CBData.xml are estimated as Error. === 27.08.2012 ============================================================================ - Version........: 2.1112 // J.Fes - Categorie......: Settings CheckBox - Additional Info: Ver.Info Check.Settings - Type...........: New: - Description....: new CB Setting: 'ViewNotes_Dif_AsErr':Defines if ViewNotes diffs are estimated as Error. === 27.08.2012 ============================================================================ - Version........: 2.1112 // J.Fes - Categorie......: Settings CheckBox - Additional Info: Ver.Info Check.Settings - Type...........: New: - Description....: new CB Setting:'Refset_Feature3D_n_DeviationMax' defines max deviation until compairing 'Refset.Feature3D_n' is void as a Ok. === 24.08.2012 ============================================================================ - Version........: 2.1110 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Type...........: Change: === 20.08.2012 ============================================================================ - Version........: 2.1105 // A.Becker - Categorie......: Scripting - Additional Info: UpdDb=No - Type...........: New: - Description....: In Scripten können zusätzliche Assemblies als Referenz angegeben werden. Syntax: 'References Assembly.dll === 20.08.2012 ============================================================================ - Version........: 2.1105 // A.Becker - Categorie......: Scripting - Additional Info: UpdDb=No - Type...........: New: - Description....: In Scripten können zusätzliche Assemblies als Referenz angegeben werden. Syntax: 'References Assembly.dll === 19.08.2012 ============================================================================ - Version........: 2.1104 // J.Fes - Categorie......: Settings CheckBox - Additional Info: Ver.Info Check.Settings - Type...........: Change: - Description....: CBCompair_ResultAnalyse creates also tif files if required. === 19.08.2012 ============================================================================ - Version........: 2.1104 // J.Fes - Categorie......: Settings CheckBox - Additional Info: Ver.Info Check.Settings - Type...........: Change: - Description....: CBCompair_ResultAnalyse creates also tif files if required. === 16.08.2012 ============================================================================ - Version........: 2.1103 // J.Fes - Categorie......: CheckBox - Additional Info: Ver.Info - Type...........: Change: - Description....: Names of CheckBox Data Results changed === 16.08.2012 ============================================================================ - Version........: 2.1103 // J.Fes - Categorie......: CheckBox - Additional Info: Ver.Info - Type...........: Change: - Description....: Names of CheckBox Data Results changed === 19.07.2012 ============================================================================ - Version........: 2.1086 // J.Fes - Categorie......: JobControl - Additional Info: UpdDb=Yes - Type...........: New: - Description....: Es können jetzt in den JobControl Rules via Extendet Process Controls Definitionen der Status anderer Process Gruppen mit geändert werden. #Syntax.: [RuleID=OK] [O.Type=*] [...] [P0#n#.Stat=#NewStatus#]. #Example: [RuleID=OK] [O.Type=*] [J.ResCode=0] [J.ResMsg=*] [J.ResWarn=0] [P.Stat=D.OK] [P01.Stat=RUN] [P02.Stat=RUN] === 06.07.2012 ============================================================================ - Version........: 2.1077 // J.Fes - Categorie......: ObjectList - Additional Info: Ver.Info - Description....: wird in der Id EingabeBox ein Return eingegben so wird das laden der Object Daten aus der Datenbank ausgeführt. Es hat den selben Effekt wie das anklicken des Knopf's 'Load List' === 03.07.2012 ============================================================================ - Version........: 2.1072 // J.Fes - Categorie......: Import Sites/Data Import Settings - Additional Info: Ver.Info - Description....: Neu: der Knopf J.Link verwendet die Ersetzungsregeln die definiert wurden in: ServerSettings.ReplaceRules === 03.07.2012 ============================================================================ - Version........: 2.1072 // J.Fes - Categorie......: Install and Setup DB - Additional Info: Ver.Info - Description....: #Neu: Standard DB Backupverzeichnis eingefügt ..\90-DATA\#Customer#\30-DataBase\24-JobServerDbBackup === 21.06.2012 ============================================================================ - Version........: 2.1060 // J.Fes - Categorie......: CheckBox - Additional Info: Ver.Info - Description....: Änderung: CB ResultFiles Trenner geändert von '_' auf '-' Bspl: alt: ug0000036000_NX75_CB3_CB2_Dif_Xml.txt -> ug0000036000_NX75_CB3-CB2_CBDif.txt === 21.06.2012 ============================================================================ - Version........: 2.1060 // J.Fes - Categorie......: CheckBox - Additional Info: Ver.Info - Description....: Änderung: CB ResultFiles Trenner geändert von '_' auf '-' Bspl: alt: ug0000036000_NX75_CB3_CB2_Dif_Xml.txt -> ug0000036000_NX75_CB3-CB2_CBDif.txt === 01.06.2012 ============================================================================ - Version........: 2.1048 // J.Fes - Additional Info: Ver.Info - Description....: Neuerung: beim dem Versuch den JobClient Computer zu Rebooten ist der JobClient hängen geblieben. Ursache: Down.exe fehlte im .\02-BinClient Verzeichniss. Korrigiert === 01.06.2012 ============================================================================ - Version........: 2.1048 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Description....: Wenn im Job kein NX.syslog file enthalten war. wurde die TcSiteId nicht in allen Fällen korrekt ermittelt korriegiert === 05.04.2012 ============================================================================ - Version........: 2.0987 // J.Fes - Categorie......: JobControl Settings - Additional Info: Ver.Info Check.Settings - Type...........: Doc: - Description....: Ablagestruktur von 90-DATA\#CustomerNameShort_WorkInst#\10-JobLogArchiv\ reorganiesiert. Die Logfiles werden jetzt in eigene Unterverzeichnisse je JobName abgelegt. Bestehendes 10-JobLogArchiv Verzeichnis inc. aller Logfiles einfach in Unterverzeichniss \10-JobLogArchiv\zz-JobLogArchiv_Until2012-06-08 verschieben. === 05.04.2012 ============================================================================ - Version........: 2.0987 // J.Fes - Categorie......: Scripts/Params. - Additional Info: Ver.Info - Description....: Neuerung: #Var: #JobScriptMinus1_DP# (=wie:#JobScriptTemplateMinus1_DP#) === 05.04.2012 ============================================================================ - Version........: 2.0987 // J.Fes - Categorie......: Scripts/Params. - Additional Info: Ver.Info - Description....: Neuerung: #Var: #JobScript_DP# (=wie:#JobScriptTemplate_DP#) === 05.04.2012 ============================================================================ - Version........: 2.0987 // J.Fes - Categorie......: Scripts/Params. - Additional Info: Ver.Info - Description....: Neuerung: #Var: #JobScript_DPNE# (=wie:#JobScriptTemplate_DPNE#) === 05.04.2012 ============================================================================ - Version........: 2.0987 // J.Fes - Categorie......: Scripts/Params. - Additional Info: Ver.Info - Description....: Neuerung: es steht die GitterVariable: #JobLogZipArchiv_DPNE# zur verfügung. Diese kann genutzt werden um z.B. in einer E-Mail auf den JobLogZipArchive File zu verweisen. === 03.03.2012 ============================================================================ - Version........: 2.0974 // J.Fes - Categorie......: ObjectList Settings - Additional Info: Ver.Info Check.Settings - Description....: Neuerung: Process State Edit Form überarbeitet === 20.02.2012 ============================================================================ - Version........: 2.0962 // J.Fes - Categorie......: Install and Setup JobControl Scripts/Params. Settings - Additional Info: Ver.Info Check.Settings - Description....: Neuerung:#Root_DP#\03-BinPublic.ClientServer eingeführt. In diesem Verzeichniss befinden sich Tools die von dem JobCLient's und von dem JobServer gleichzeitig verwendet werden. Beispiel: JobManagerCmdTools.exe === 19.02.2012 ============================================================================ - Version........: 2.0961 // J.Fes - Categorie......: Import JobControl - Additional Info: Ver.Info - Type...........: New: - Description....: JobLogFiles werden jetzt in Unterverzeichnissen abgelegt Example: ..\90-DATA\#Customer_WorkInst#\10-JobLogArchiv\#SiteId#_#JobContolName#\#JobName#.zip abgelegt Jobs die einen Error oder eine Exception währenden des Importvorganges hatten werden in das Verzeichniss ..\90-DATA\#Customer_WorkInst#\10-JobLogArchiv.ImportError\#JobName#.zip abgelegt === 13.02.2012 ============================================================================ - Version........: 2.0951 // J.Fes - Categorie......: JobControl Settings - Additional Info: Ver.Info Check.Settings - Description....: in JobScriptsNeuerung: wird im JobScript set JobAddFile_ObjectsList_txt=false angegben so wird der File:[#JobName#_ObjectsList.txt] nicht dem JobFile hinzugefuegt. === 13.02.2012 ============================================================================ - Version........: 2.0951 // J.Fes - Categorie......: JobControl Settings - Additional Info: Ver.Info Check.Settings - Description....: in JobScriptsNeuerung: wird im JobScript set JobAddFile_ObjectsListAllDetails_txt=false angegben so wird der File:[#JobName#_ObjectsListAllDetails.txt] nicht dem JobFile hinzugefuegt. === 13.02.2012 ============================================================================ - Version........: 2.0951 // J.Fes - Categorie......: JobControl Settings - Additional Info: Ver.Info Check.Settings - Description....: in JobScriptsNeuerung: wird im JobScript set JobAddFile_ObjectsProcessData_xml=false angegben so wird der ] nicht dem JobFile hinzugefuegt. === 13.02.2012 ============================================================================ - Version........: 2.0951 // J.Fes - Categorie......: JobControl Settings - Additional Info: Ver.Info Check.Settings - Description....: in JobScriptsNeuerung: wird im JobScript set JobAddFile_JobData1ToProcess_xml=false angegben so wird der File:[JobData1ToProcess_XML] nicht dem JobFile hinzugefuegt. === 05.01.2012 ============================================================================ - Version........: 2.0931 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Description....: Neuerung: SQL Query wird jetzt immer in die InfoSys mit ausgegeben === 21.12.2011 ============================================================================ - Version........: 2.0921 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Description....: Neuerung: Variablen ersetzung #TcSiteId# steht jetzt zur verfügung === 19.12.2011 ============================================================================ - Version........: 2.0920 // J.Fes - Categorie......: ObjectList - Additional Info: UpdDb=Yes Ver.Info - Description....: Neuerung: die Objects Daten beinhaltet jetzt den Ir.Type === 18.12.2011 ============================================================================ - Version........: 2.0917 // J.Fes - Categorie......: ObjectList - Additional Info: Ver.Info - Description....: Neuerung: Performance Edit Processstatus/Mark.Object verbessert === 28.11.2011 ============================================================================ - Version........: 2.0907 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Description....: Neuerung: es gelten jetzt folgenden Regeln - Wenn ein Process als Me.ProcessResultCode = 0 And Me.ProcessResultHasWarning = false dann ist der P.Stat=D.OK - Wenn ein Process als Me.ProcessResultCode <> 0 dann ist der P.Stat=D.ERR - Wenn ein Process als Me.ProcessResultCode = 0 And Me.ProcessResultHasWarning = true dann ist der P.Stat=D.W === 23.11.2011 ============================================================================ - Version........: 2.0903 // J.Fes - Categorie......: JobControl - Additional Info: UpdDb=Yes Ver.Info - Description....: Neuerung: ProcessProcState auf 34 Zeichen erweitert Der Process Status wird jetzt mit P. + ProcessName angezeigt. Example: P.RfSp === 17.11.2011 ============================================================================ - Version........: 2.0901 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Description....: Neuerung: wird auf dem JobCLient der Modus D=Debug aktiviert, dann wird automaitsch die Gittervariable:#JobScriptParametersExtended# am Ende mit dem Eintrag 'set JobMgr_Debug=ON' ergänzt. === 17.11.2011 ============================================================================ - Version........: 2.0901 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Description....: Neuerung: wird auf dem JobCLient der Modus T=Test aktiviert, dann wird automaitsch die Gittervariable:#JobScriptParametersExtended# am Ende mit dem Eintrag 'set JobMgr_Test=ON' ergänzt. === 17.11.2011 ============================================================================ - Version........: 2.0900 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Description....: Neuerung: Beim arbeiten mit mehrere JobServern Processen wurden empfangene Pakete zwischen den den Jobserver Prozessen von den unterschiedlichen Jobserver Prozessen zufällig verarbeitet. Das wird jetzt dadurch vermieden das jeder Process einen eigenes Empfangsverzeichniss hat:...\90-DATA\CustomerNameShort_WorkInst_TEST\90-JobTemp.BackFromClient\#ComuterName#_P#Protnummer# === 15.11.2011 ============================================================================ - Version........: 2.0898 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Description....: Neuerung: der process status kann nach ergebniss regeln bestimmt werden. === 11.11.2011 ============================================================================ - Version........: 2.0894 // J.Fes - Categorie......: CheckBox - Additional Info: Ver.Info - Description....: Neuerung: Ausgabeformat angepasst === 11.11.2011 ============================================================================ - Version........: 2.0894 // J.Fes - Categorie......: CheckBox - Additional Info: Ver.Info - Description....: Neuerung: Ausgabeformat angepasst === 11.11.2011 ============================================================================ - Version........: 2.0894 // J.Fes - Categorie......: CheckBox - Additional Info: Ver.Info - Description....: Neuerung: Ausgabeformat angepasst === 11.11.2011 ============================================================================ - Version........: 2.0894 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Type...........: New: - Description....: F1 Help avilable === 11.11.2011 ============================================================================ - Version........: 2.0894 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Description....: Neuerung: F1 Hilfe verfügbar für JobContol.Rules. Edit via JobRule Editor === 11.11.2011 ============================================================================ - Version........: 2.0894 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Description....: Neuerung: F1 Hilfe verfügbar für JobContol.Rules. Edit via JobRule Editor === 08.11.2011 ============================================================================ - Version........: 2.0890 // J.Fes - Categorie......: Import Sites/Data Import - Additional Info: Ver.Info - Description....: Neuerung: die Titelbezeichung geändert von 'Group' auf 'OrgInfo.Group' und von 'Note' auf 'OrgInfo.Note' === 08.11.2011 ============================================================================ - Version........: 2.0890 // J.Fes - Categorie......: Import Sites/Data Import - Additional Info: UpdDb=Yes - Description....: Neuerung:Es können jetzt include Group Filter für den Import von TC.Daten definiert werden. z.B. Können hierdurch nur die Daten die der Gruppe 'Norm' gehören importiert werden. === 31.10.2011 ============================================================================ - Version........: 2.0884 // J.Fes - Categorie......: Import Sites/Data Import ObjectList - Additional Info: UpdDb=Yes - Description....: Neuerung: Es können jetzt Daten aus unterschiedliche Oracle Datenbanken abgefragt werden ohne zufor die Software neu zu starten. Zuvor war es erforderlich die Software neu zu starten wenn z.B. Daten aus TcDb2 abgerufen werden sollten jedoch zuvor Daten aus TcDb1 abgerufen wurden. === 31.10.2011 ============================================================================ - Version........: 2.0886 // J.Fes - Categorie......: JobControl - Additional Info: UpdDb=Yes - Description....: Neuerung: Daten Feld grösse 'J.on Computers' geändert von 128 Zeichen auf 4000 Zeichen === 31.10.2011 ============================================================================ - Version........: 2.0886 // J.Fes - Categorie......: JobControl - Additional Info: UpdDb=Yes - Description....: Neuerung: Neue JobControl Regeln eingearbeitet 'sel:O.FsHitCountYN', 'J.Resource.Points', 'J.Res.P.State Value Rule' === 30.10.2011 ============================================================================ - Version........: 2.0882 // J.Fes - Categorie......: GUI Settings - Additional Info: Ver.Info Check.Settings - Description....: Neuerung: im Application Titel wird der wert von JobServer_WorkInstanceTitelName mit angezeigt. Hierdurch wird die es beim handhaben mit mehreren Umgebungen Übersichtlicher === 30.10.2011 ============================================================================ - Version........: 2.0882 // J.Fes - Categorie......: Settings - Additional Info: Ver.Info Check.Settings - Description....: Neu: via settings kann der JobServer_WorkInstanceTitelName eingestellt werden === 30.10.2011 ============================================================================ - Version........: 2.0883 // J.Fes - Categorie......: ObjectList - Additional Info: Ver.Info - Description....: Neuerung: Die Daten in der Spalte O.Nx.Type werden wie folgt eingefärbt: - 'SP' in Gelb - AP in DodgerBlue === 27.10.2011 ============================================================================ - Version........: 2.0880 // J.Fes - Categorie......: GUI - Additional Info: Ver.Info - Type...........: New: === 26.10.2011 ============================================================================ - Version........: 2.0879 // J.Fes - Categorie......: DB Import Sites/Data Import - Additional Info: Ver.Info - Description....: Neuerung: der DBNetworkAlias kann jetzt via Dropdown Schalter ausgewählt werden. Die Namen werden aus dem file tnsnames.ora geparst und angezeigt. Die Datei tnsnames.ora muss jetzt mit ausgewählt werden. === 25.10.2011 ============================================================================ - Version........: 2.0878 // J.Fes - Categorie......: ObjectList - Additional Info: Ver.Info - Description....: Neuerung: Beim klicken auf den Knopf in Search und List 'Objects (DS/IRs)' wird die Processspalte des aktuellen Prozesses automatisch eingblendet falls diese zuvor ausgeblendet war. === 25.10.2011 ============================================================================ - Version........: 2.0878 // J.Fes - Categorie......: ObjectList - Additional Info: Ver.Info - Description....: Die Spalten [ProcStateCol] der Daten in 'Objects (DS/IRs)' werden in abhänikeit von ihrem Wert eingefärbt. Es gelten folgende Regeln: -Wert:N (Hellgrau) -Wert:A (Blau/Weis) -Wert:M (Cyan) -Wert:P (Orange) -Wert:D (Grün) -Wert:X (Rot) -Wert:*.Err (Rot) -Wert:*.Ok (Grün) === 25.10.2011 ============================================================================ - Version........: 2.0878 // J.Fes - Categorie......: ObjectList - Additional Info: Ver.Info - Description....: Die Datenzeilen in 'Objects (DS/IRs)' bei Replica(non Owingsite) Objekten werden in Grau-Blau dargestellt. === 24.10.2011 ============================================================================ - Version........: 2.0875 // J.Fes - Categorie......: ObjectList - Additional Info: Ver.Info - Description....: Aenderung: Farbsteuerun P.Status = 'M' die Zelle wird jetzt in Cyan dargestellt === 24.10.2011 ============================================================================ - Version........: 2.0875 // J.Fes - Categorie......: ObjectList - Additional Info: Ver.Info - Description....: Aenderung: Farbsteuerun P.Status = 'M*' die Zelle wird jetzt in leicht dunklerem Cyan dargestellt === 23.10.2011 ============================================================================ - Version........: 2.0874 // J.Fes - Categorie......: CheckBox - Additional Info: Ver.Info - Description....: Aenderung: Ausgabe der 3D Koordinaten fuer bessere lesbarkeit Optimiert === 13.10.2011 ============================================================================ - Version........: 2.0869 // A.Becker - Additional Info: UpdDb=No - Description....: Neu: Mehrere Dateien können vom JobClient per Job übertragen werden. === 27.09.2011 ============================================================================ - Version........: 2.0855 // J.Fes - Categorie......: CheckBox - Additional Info: Ver.Info - Description....: Aenderung:Fuer den Vergleich der Komponenten werden nur noch die InstanceHandle herangezogen. Der Vergleich via Handel=CompontenHandel enfällt da dieser kongurierten zum InstanceHandel ist. === 19.09.2011 ============================================================================ - Version........: 2.0849 // J.Fes - Categorie......: CheckBox - Additional Info: Ver.Info - Type...........: Doc: - Description....: Assembly ReferenceComponent (nur zur reference) wird jetzt ausgewertet === 13.09.2011 ============================================================================ - Version........: 2.0843 // J.Fes - Categorie......: DB Import Sites/Data Import - Additional Info: Ver.Info - Type...........: Doc: - Description....: Tritt ein SQL-Fehler beim lesen der IR Attribute aus der TC.DB auf dann wird die folgende Meldung ausgegben:'Err: Cannot Read IR Attribues ..' === 13.09.2011 ============================================================================ - Version........: 2.0843 // J.Fes - Categorie......: Import Sites/Data Import - Additional Info: Ver.Info - Description....: Wenn beim Import eine Exception auftritt so wird diese am Ende es Imports ausgegeben Meldung: [EXP: while Import Object:#IrCliNameFromSiteIdPuiDForOutput#] === 04.09.2011 ============================================================================ - Version........: 2.0809 // J.Fes - Categorie......: ObjectJobResults - Additional Info: Ver.Info - Description....: Aenderung:MCS Report Parsing überarbeitet === 04.09.2011 ============================================================================ - Version........: 2.0809 // J.Fes - Categorie......: ObjectJobResults - Additional Info: Ver.Info - Description....: Aenderung:MCS Report Parsing überarbeitet === 03.09.2011 ============================================================================ - Version........: 2.0808 // J.Fes - Categorie......: DB Import Sites/Data Import - Additional Info: UpdDb=Yes - Description....: Import Performance Optimiert hierzu wurden - Abgleich Methoden zum holen der Daten aus der JS DB verbessert. - IR Daten werden jetzt nur noch beim ersten Dataset 'Importiert-Updatet' wenn weitere Datasets der IR importiert werden so entfällt der 'Importiert-Updatet' der IR Daten. === 30.08.2011 ============================================================================ - Version........: 2.0803 // J.Fes - Categorie......: Import Sites/Data Import - Additional Info: Ver.Info - Description....: Sync.Site.Data: Es wird jetzt auch verglichen ob IrOwningSite zwischen in TcDb und JsDb abweichend. Wenn ja dann werden die Daten dieser IR updatet === 26.08.2011 ============================================================================ - Version........: 2.0800 // J.Fes - Categorie......: JobControl Settings - Additional Info: Ver.Info Check.Settings - Description....: Aenderung: === 26.08.2011 ============================================================================ - Version........: 2.0800 // J.Fes - Categorie......: JobControl Settings - Additional Info: Ver.Info Check.Settings - Description....: Aenderung: === 22.08.2011 ============================================================================ - Version........: 2.0797 // J.Fes - Categorie......: CheckBox - Additional Info: Ver.Info === 27.06.2011 ============================================================================ - Version........: 2.0786 // J.Fes - Categorie......: ObjectJobResults Settings - Additional Info: Ver.Info - Description....: + New.Settings(Scripts)In generischen JobResult Files können jetzt - an 7.ter Stelle ProcessProcStateCol mitgegeben werden /ProcessProcStateCol=ProcStateCol01..ProcStateCol10..ProcStateColRf Der Wert gibt an unter welcher Processgruppe das Ergebniss gespeichert werden soll. === 27.06.2011 ============================================================================ - Version........: 2.0786 // J.Fes - Categorie......: ObjectJobResults Settings - Additional Info: Ver.Info - Description....: + New.Settings(Scripts)in generischen JobResult Files können jetzt - an 7.ter Stelle ObjectClass mitgegeben werden /ObjectClass=DS oder IR Der Wert gibt an ob das Object ein IR oder DS Objct ist === 27.06.2011 ============================================================================ - Version........: 2.0786 // J.Fes - Categorie......: ObjectJobResults Settings - Additional Info: Ver.Info - Description....: + New.Settings(Scripts)in generischen JobResult Files können jetzt - an 7.ter Stelle der Parameter /SiteId mitgegeben werden Example:/SiteId=tceng Der Wert gibt an von welcher Site die ObjectDaten stammen === 27.06.2011 ============================================================================ - Version........: 2.0787 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Type...........: New: - Description....: Es ist jetzt moeglich das die Ergebnisse von Refile Prozessen und von weiteren Generischen Prozessen gleichzeitig eingelesen werden können. === 25.06.2011 ============================================================================ - Version........: 2.0782 // J.Fes - Additional Info: Ver.Info - Description....: IrInfoResolve_2011_06 erstellt === 18.06.2011 ============================================================================ - Version........: 2.0780 // J.Fes - Categorie......: JobControl Settings - Additional Info: Ver.Info Check.Settings - Description....: JobControl --> Job Computers: --> C.works for Site Werte können jetzt via IN-LIST (TCSite1TCSite2) angegeben werden === 13.06.2011 ============================================================================ - Version........: 2.0771 // J.Fes - Categorie......: DB Import Sites/Data Import - Additional Info: Ver.Info - Description....: TC data containing ' char in ItemId or IrId or in any names are now imported to JM.DB. === 13.06.2011 ============================================================================ - Version........: 2.0771 // J.Fes - Categorie......: Import Sites/Data Import - Additional Info: UpdDb=Yes Ver.Info - Description....: Buttom:Sync.Site.Data Updatet jetzt alle Irs + Datasets bei dem Ir.LastModDate zwischen Tc und JobMgr Db um 60 sec abweicht. Wenn ja dann werden die Daten dieser IR updatet === 13.06.2011 ============================================================================ - Version........: 2.0771 // J.Fes - Categorie......: Import Sites/Data Import - Additional Info: UpdDb=Yes Ver.Info - Description....: Neuer Start Buttom:Syn.Site.Data im Register:[Sites/Data Import] eingefuegt === 11.04.2011 ============================================================================ - Version........: 2.0760 // J.Fes - Categorie......: Settings CheckBox - Additional Info: Ver.Info Check.Settings - Description....: Es kann jetzt festgelegt werden ob abweichungen beim ViewOutOfDateStatus als Error oder als Warning gewertet werden soll === 30.03.2011 ============================================================================ - Version........: 2.0756 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Description....: Refile analysiert MC to AC konvertierung Optimierung der Ausgaben. Analysiert jetzt auch: Warning: 'Validation was skipped during conversion because referenced data was not loaded' Alle Zeilen die convert_mcs Warning: * beinhalten === 30.03.2011 ============================================================================ - Version........: 2.0756 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Description....: Refile analysiert MC to AC konvertierung Optimierung der Ausgaben. Analysiert jetzt auch: Warning: 'Validation was skipped during conversion because referenced data was not loaded' Alle Zeilen die convert_mcs Warning: * beinhalten === 07.03.2011 ============================================================================ - Version........: 2.0748 // J.Fes - Categorie......: Import Sites/Data Import Settings - Additional Info: UpdDb=Yes Ver.Info Check.Settings - Description....: es steht unter den Sites/Dataimport eine Methode zur verfügung um Oracle Tabellen unter alternativen user abfragen zu können. Hierfür steht das Feld Ora.TblNam.InfodbaReplace === 25.02.2011 ============================================================================ - Version........: 2.0744 // J.Fes - Categorie......: Settings CheckBox - Additional Info: Ver.Info Check.Settings - Description....: beim Auswerten der PartHeader.CliName wird jetzt bei Native CB FileName.Ext fuer den Vergleich herangezogen === 12.02.2011 ============================================================================ - Version........: 2.0735 // J.Fes - Categorie......: JobControl ObjectJobResults - Additional Info: Ver.Info - Description....: in den McsConvert LogFiles werden jetzt die Convert Sections für ein Part gefunden wenn z.B. folgende Namensaufbau 'Item/Rev-AnyDescription:' festgelegt wurde. siehe hierzu auch Definition in den CustomerDefaults für preferenc: Name=Assemblies_partDescriptiveName Value=$FILENAME === 12.02.2011 ============================================================================ - Version........: 2.0735 // J.Fes - Categorie......: JobControl ObjectJobResults - Additional Info: Ver.Info - Description....: in den McsConvert LogFiles werden jetzt die Convert Sections für ein Part gefunden wenn z.B. folgende Namensaufbau 'Item/Rev-AnyDescription:' festgelegt wurde. siehe hierzu auch Definition in den CustomerDefaults für preferenc: Name=Assemblies_partDescriptiveName Value=$FILENAME === 17.01.2011 ============================================================================ - Version........: 2.0725 // J.Fes - Categorie......: GUI Settings - Additional Info: UpdDb=No - Description....: der aktive Debug Modus wird jetzt in der Regestrie gepseichert und ist nicht mehr abhänig von MyAppl_Settings.ServerSettings.JobServer_LogOnOff Info: MyAppl_Settings.ServerSettings.JobServer_LogOnOff wurde entfernt === 29.12.2010 ============================================================================ - Version........: 2.0713 // J.Fes - Categorie......: ObjectList - Additional Info: Ver.Info - Description....: DataSetType erweitert um: CAESOLUTIONCAEMESHCAEGEOM === 19.12.2010 ============================================================================ - Version........: 2.0711 // J.Fes - Categorie......: CheckBox - Additional Info: Ver.Info - Description....: HandleForCompair wird jetzt um 3 Zeichen gekuezt (zuvor waren es 2 Zeichen) Example:'R00006eab000000fd'->'R00006eab00000' === 07.12.2010 ============================================================================ - Version........: 2.0708 // J.Fes - Categorie......: CheckBox - Additional Info: Ver.Info - Description....: Component->UG_Geometry neu eingefügt === 07.12.2010 ============================================================================ - Version........: 2.0708 // J.Fes - Categorie......: CheckBox - Additional Info: Ver.Info - Description....: Component->ReferenceComponent neu eingefügt === 07.12.2010 ============================================================================ - Version........: 2.0708 // J.Fes - Categorie......: Settings CheckBox - Additional Info: Ver.Info - Description....: es kann jetzt festgelegt werden ob Komponenten mit Attribut UG_Geometry=NO miteinander verglichen werden sollen\wenn Me.Settings.AssemblyUG_GeometryNO_DoCompare -true=Komponenten vergleichen -false=Komponenten wird nicht verglichen (skip) === 25.11.2010 ============================================================================ - Version........: 2.0705 // J.Fes - Categorie......: ObjectJobResults - Additional Info: Ver.Info - Description....: wenn bei einem GenericProcess ein .\_convert_mcs.log file enthalten ist so wird dieser automatisch ausgewertet === 18.11.2010 ============================================================================ - Version........: 2.0702 // J.Fes - Categorie......: ObjectList - Additional Info: Ver.Info - Description....: Objecte können jetzt auch über ObjectCreateDate gesucht werden === 27.10.2010 ============================================================================ - Version........: 2.0697 // J.Fes - Categorie......: Settings CheckBox - Additional Info: Ver.Info Check.Settings - Description....: legt die Liste der Modeldata Refset Namen fest die nicht verglichen werden sollen === 25.10.2010 ============================================================================ - Version........: 2.0695 // J.Fes - Categorie......: Settings CheckBox - Additional Info: Ver.Info Check.Settings - Description....: die Parthistory's werden ausgewertet. Die Auswertung erfolgt durch vergleichen der Speicherversionen. Der Parthistory Check gilt dann als bestanden wenn die Daten die mit der neueren Version ermittelt wurden mindestens den mit dem gleichen Versionstand gespeichert wurden wie die Daten die mit der Vorgängerversion ermittelt wurden. Regel: Wird ein Parthstory Error erkannt so wird das Part Automatisch auf exclude gesetzt. Siehe hierzu auch Settings.CheckBox CheckBoxPartHistoryCheck_AsErr === 21.10.2010 ============================================================================ - Version........: 2.0693 // J.Fes - Categorie......: Settings CheckBox - Additional Info: Ver.Info Check.Settings - Description....: Entity_Type26 Assoc Enty 1+2 differenzen werden jetzt nur noch bezüglich der Existenz eines Assoc Handels geprüft. === 18.10.2010 ============================================================================ - Version........: 2.0690 // J.Fes - Categorie......: Reports - Additional Info: UpdDb=Yes Ver.Info - Description....: Report Layout und Print Engine implementiert === 23.09.2010 ============================================================================ - Version........: 2.0688 // J.Fes - Categorie......: CheckBox - Additional Info: Ver.Info - Description....: es werden bei Entity_Type26 nur die Entity ausgewertet die den Status = 3 haben. === 23.09.2010 ============================================================================ - Version........: 2.0688 // J.Fes - Categorie......: CheckBox - Additional Info: Ver.Info - Description....: es werden bei Entity_Type26 nur die Entity ausgewertet die den Status = 3 haben. === 14.09.2010 ============================================================================ - Version........: 2.0686 // J.Fes - Categorie......: ObjectList - Additional Info: Ver.Info - Description....: wenn der JobLink Button angeklickt wird und während dessen die shift Taste gedrückt wird öffnet sich der Exporer im Verzeichniss in dem das Dokument liegt und selectiert dieses. === 14.09.2010 ============================================================================ - Version........: 2.686 // J.Fes - Categorie......: ObjectList - Additional Info: Ver.Info - Description....: wenn der JobLink Button angeklickt wird und während dessen die shift Taste gedrückt wird öffnet sich der Exporer im Verzeichniss in dem das Dokument liegt und selectiert dieses. === 03.09.2010 ============================================================================ - Version........: 2.0678 // J.Fes - Categorie......: Settings CheckBox - Additional Info: Ver.Info Check.Settings - Description....: :SetupCheckBox umfangreiche anpassungen durchgeführt um die Vergleiche beim Kunden auf die Version angemessen einstellen zu können === 01.09.2010 ============================================================================ - Version........: 2.0676 // J.Fes - Categorie......: Scripts/Params. - Additional Info: Ver.Info - Description....: Neue Gittervariablen #TcUser# und #TcUserPassword# verfuegbar === 30.08.2010 ============================================================================ - Version........: 2.0675 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Description....: der JobClient kann jetzt via ctr+f FinishAndQuit oder via ctr+c FinishAndReboot beendet werden\Info via c kann innerhalb von 60sec der bootvorgang abgebrochen werden === 30.08.2010 ============================================================================ - Version........: 2.0675 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Description....: Reboot des JobClients kann jetzt durch den JobServer ausgelöst werden. === 25.08.2010 ============================================================================ - Version........: 2.0674 // J.Fes - Categorie......: Scripting - Additional Info: Ver.Info - Description....: Versions Update QWhale_Editor_reg_1.56 === 10.08.2010 ============================================================================ - Version........: 2.0668 // J.Fes - Categorie......: Import Sites/Data Import Settings - Additional Info: UpdDb=Yes Check.Settings - Description....: es kann jetzt festgelegt werden ob AP's(Baugruppen) mit 0 Komponenten als SP(Einzelteil) gewertet werden. siehe:Sites/Data Import 'Imp.Ap wi.CompN=0 As Sp' #Info: alle Default einstellung AP=0 als AP werten bleiben bestehen. === 02.08.2010 ============================================================================ - Version........: 2.0666 // J.Fes - Categorie......: Import Sites/Data Import - Additional Info: Ver.Info - Description....: Beim import via Objects (DS/IRS)->Extras->Import datasets.. können jetzt auch mehrere IR's angegeben werden! === 02.08.2010 ============================================================================ - Version........: 2.666 // J.Fes - Categorie......: Import Sites/Data Import ObjectList - Additional Info: Ver.Info - Description....: Beim import via Objects (DS/IRS)->Extras->Import datasets.. können jetzt auch mehrere IR's angegeben werden! === 28.07.2010 ============================================================================ - Version........: 2.0661 // J.Fes - Categorie......: Import Sites/Data Import ObjectList - Additional Info: Ver.Info - Description....: wenn IR und BOM Strukturen importiert werden wird nach dem Import das Ergebnis mit angezeigt === 28.07.2010 ============================================================================ - Version........: 2.0661 // J.Fes - Categorie......: Import Sites/Data Import ObjectList - Additional Info: Ver.Info === 28.07.2010 ============================================================================ - Version........: 2.661 // J.Fes - Categorie......: Import Sites/Data Import ObjectList - Additional Info: Ver.Info - Description....: wenn IR und BOM Strukturen importiert werden wird nach dem Import das Ergebniss mit angezeigt === 21.07.2010 ============================================================================ - Version........: 2.0658 // J.Fes - Categorie......: JobControl Settings - Additional Info: Ver.Info Check.Settings - Description....: die Vorgaben für die Zeitsteuerungen wurden für das den JobClient angepasst === 20.07.2010 ============================================================================ - Version........: 2.0657 // J.Fes - Categorie......: JobControl Settings - Additional Info: Ver.Info Check.Settings - Description....: Me.JobDef.JobFiles.JobCustomFiles überprüfen siehe auch QuellCode JobServer_JobControl_Main === 15.07.2010 ============================================================================ - Version........: 2.0652 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Description....: dem zu startenden Script wird im Parameter P1 der TcUser und dem P2 das TcPw uebergeben === 10.07.2010 ============================================================================ - Version........: 2.0636 // J.Fes - Categorie......: Import Reports - Additional Info: Ver.Info - Description....: Tc.Read.Err werden jetzt am Ende des Import Reports mit ausgegeben === 10.07.2010 ============================================================================ - Version........: 2.0636 // J.Fes - Categorie......: Import - Description....: Ein kontrollierter Stop des Importprozesses jetzt besser möglich. Es wird jetzt jede 2sec beim analysieren der BOM Strukturen ein Forms.Refresh ausgeführt === 09.07.2010 ============================================================================ - Version........: 2.0635 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Description....: JobComputer's Spaltenüberschriften überarbeitet === 09.07.2010 ============================================================================ - Version........: 2.0634 // J.Fes - Categorie......: Import Sites/Data Import - Additional Info: UpdDb=Yes - Description....: Issue:Transaction deadlocked now we retry the transaction. To prevent this issue in some TSQL Procedures statment .. WITH (nolock) is added === 09.07.2010 ============================================================================ - Version........: 2.0634 // J.Fes - Categorie......: Settings - Additional Info: UpdDb=Yes - Description....: neue #Var #JobComputers_tbl.ComputerFQDN# === 09.07.2010 ============================================================================ - Version........: 2.0634 // J.Fes - Categorie......: Settings - Additional Info: UpdDb=Yes - Description....: neue #Var #JobComputers_tbl.Custom01# .. User02# === 09.07.2010 ============================================================================ - Version........: 2.0634 // J.Fes - Categorie......: Settings - Additional Info: UpdDb=Yes - Description....: neue #Var #JobComputers_tbl.ComputerFQDN# === 09.07.2010 ============================================================================ - Version........: 2.0634 // J.Fes - Categorie......: Settings - Additional Info: UpdDb=Yes - Description....: neue #Var #JobComputers_tbl.Custom01# .. User02# === 08.07.2010 ============================================================================ - Version........: 2.0633 // J.Fes - Categorie......: Import - Additional Info: UpdDb=Yes - Description....: Import Methoden ergäntzt jetzt kann festgelegt werden ob: - alle Irs nach UgMaster Objekten durchsucht werden sollen - oder nur die IRs gesucht werden die einen UgMaster besitzen === 08.07.2010 ============================================================================ - Version........: 2.0633 // J.Fes - Categorie......: DB Import - Additional Info: UpdDb=Yes - Description....: es kann festgelegt werden ob die ObjectFs_NE informationen in die DB Importiert werden (Ein/Aus) === 08.07.2010 ============================================================================ - Version........: 2.0633 // J.Fes - Categorie......: DB Import - Additional Info: UpdDb=Yes - Description....: es kann festgelegt werden ob die ObjectFs_DPNE informationen in die DB Importiert werden (Ein/Aus) === 19.06.2010 ============================================================================ - Version........: 2.0627 // J.Fes - Categorie......: Scripts/Params. - Additional Info: Ver.Info - Description....: Korrektur:ScriptEditor Projektfile wurde evtl. falsch gesucht bereinigt === 03.06.2010 ============================================================================ - Version........: 2.0623 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Description....: JobComputersScript_Execute wird jetzt mit AppWinStyle.NormalFocus ausgeführt === 02.06.2010 ============================================================================ - Version........: 2.0621 // J.Fes - Categorie......: CheckBox - Additional Info: Ver.Info - Description....: Entities 26 (dimension) text compair added. === 02.06.2010 ============================================================================ - Version........: 2.0621 // J.Fes - Categorie......: JobControl Settings - Additional Info: Check.Settings - Description....: JobClient_ReceiveCmdTimeOut default set to min 10 sec Default=120 === 11.05.2010 ============================================================================ - Version........: 2.0616 // J.Fes - Categorie......: ObjectList - Additional Info: Ver.Info - Description....: NXsimulation eingefügt === 04.05.2010 ============================================================================ - Version........: 2.0614 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Description....: All converted constraints in this part where suppressed as they could not solve Ein Objekt bei dem ein Validation failed kommt wird das Objekt wie folgt gekennzeichnet: - .ProcessResultHasWarning = True - P.ResultMess: Rf.MC Convert Warning:[02]:[All converted constraints in this part were suppressed as they could not solve] Info: Analyse wird nur ausgefuehrt wenn der Refile mit Done und Error=0 durchgeführt wurde! === 04.05.2010 ============================================================================ - Version........: 2.0614 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Description....: All converted constraints in this part were suppressed as they could not solve Ein Objekt bei dem ein Validation failed kommt wird das Objekt wie folgt gekennzeichnet: - .ProcessResultHasWarning = True - P.ResultMess: Rf.MC Convert Warning:[02]:[All converted constraints in this part were suppressed as they could not solve] Info: Analyse wird nur ausgefuehrt wenn der Refile mit Done und Error=0 durchgeführt wurde! === 27.04.2010 ============================================================================ - Version........: 2.0610 // J.Fes - Categorie......: CheckBox - Additional Info: Ver.Info - Description....: Entity Daten neu eingefügt === 23.04.2010 ============================================================================ - Version........: 2.0606 // J.Fes - Categorie......: ObjectList - Additional Info: Ver.Info - Description....: Suchfilter erweitert um Sucheigenschaft Proccesed.On.Compuer === 15.04.2010 ============================================================================ - Version........: 2.0600 // J.Fes - Categorie......: JobControl Settings - Additional Info: Ver.Info Check.Settings - Description....: in allen Script Files die im Verzeichniss des JobScript's liegen und die Endungen *.cmd*.bat*.ps1*.pl*.txt haben. werden die #GitterVar# ersetzt === 25.03.2010 ============================================================================ - Version........: 2.0591 // J.Fes - Categorie......: ObjectList - Additional Info: Ver.Info - Description....: alle === 25.03.2010 ============================================================================ - Version........: 2.0591 // J.Fes - Categorie......: GUI ObjectList - Additional Info: Ver.Info - Description....: Object Daten können über: [Object's having FS HitCount's >0] aufgelistet werden === 25.03.2010 ============================================================================ - Version........: 2.0591 // J.Fes - Categorie......: GUI Import ObjectList - Additional Info: Ver.Info - Description....: Object Daten können über: [Object's having Import Error's] aufgelistet werden === 23.03.2010 ============================================================================ - Version........: 2.0589 // J.Fes - Categorie......: TaskScheduler - Additional Info: Ver.Info - Description....: wiederhol Task's werden jetzt korrekt ausgeführt === 23.03.2010 ============================================================================ - Version........: 2.0589 // J.Fes - Categorie......: TaskScheduler - Additional Info: Ver.Info - Description....: wenn die Objekte eines Task's keine 'UGMASTER' Objekte beinhaltet wird sofort Proc_NonMaster geschaltet. Vorteil: NonMaster Objete werden dann gleich bearbeitet. Info diese Regel wird nur dann beachtet wenn die zugehörige Prozessgruppe die Einstellung JobServerObject_UGMaster_Befor_UGNonMaster=true eingestellt wurde === 18.03.2010 ============================================================================ - Version........: 2.0588 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Description....: Gitter Variablen erweitert es stehen jetzt folgende Variablen zur verfügung -JobRule.SelObjectsBy_* -#JobRule.TimeSchedule# -#JobRule.validForComputer# === 22.01.2010 ============================================================================ - Version........: 2.0520 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Description....: Refile analysiert MC to AC konvertierung gibt die Details des betroffen Subsection aus === 22.01.2010 ============================================================================ - Version........: 2.0520 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Description....: Refile analysiert MC to AC konvertierung gibt die Details des betroffen Subsection aus === 18.01.2010 ============================================================================ - Version........: 2.0566 // J.Fes - Categorie......: ProcessGroups Settings - Additional Info: Ver.Info Check.Settings - Description....: In den ProcessGroups können Rechte Bedingungen vergeben werden wer diese ProcessGroup im JobPlaner angezeigt bekommt siehe:JobServer Process Groups->ProcessGroup01..->UserAcceesRules.. === 14.01.2010 ============================================================================ - Version........: 2.0565 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Description....: Gitter Variablen erweitert es stehen jetzt folgende Variablen zur verfügung -#ProcStateCol# ProcStateCol01..20 + Rf -#ProcStateVal# Start M,N,A -#ObjectType# UGMASTER.. -#ObjectClass# DS IR === 14.01.2010 ============================================================================ - Version........: 2.0565 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Description....: Wird ein freies SQL Script für die Objekt selection verwendet so können jetzt Gittervariablen mit verwendet werden. Bspl.:#TcSiteId#=Site #ProcStateVal#=StartVal (N,M,A..) === 06.01.2010 ============================================================================ - Version........: 2.0560 // J.Fes - Categorie......: ObjectJobResults Settings - Additional Info: Ver.Info - Description....: + New.Settings(Scripts)In Generischen JobResult Files können jetzt - an 7.ter Stelle JobServerExtendCommandsTrigger mitgegeben werden /ProcessStateSetTo=D.NX4 gibt vor welcher ProzessStatus gesetzt werden soll === 16.12.2009 ============================================================================ - Version........: 2.0558 // J.Fes - Categorie......: TaskScheduler - Additional Info: UpdDb=Yes - Description....: in den Task's kann fesgelegt werden welcher Computer einen bestimmten Task ausfuehern darf wenn es nicht der JobServer Comuter selbst ist Regel:Ist diese Eigenschaft leer so darf dieser Task nur vom JobServer Comuter ausgeführt werden === 15.12.2009 ============================================================================ - Version........: 2.0557 // J.Fes - Categorie......: JobControl Settings - Additional Info: UpdDb=Yes Check.Settings - Description....: es können jetzt erweiterte JobScript Parameter einer Job-Script Paramerter definition hinterlegt werden. === 12.12.2009 ============================================================================ - Version........: 2.0555 // J.Fes - Categorie......: ObjectList Settings - Additional Info: Ver.Info - Description....: Object_open_via_NXRouter es wurde eine Exeption aus geloest wenn UGII_ROOT_DIR und ServerSettings.UGII_ROOT_DIR_SEARCH_P nicht gesetzt waren === 12.12.2009 ============================================================================ - Version........: 2.555 // J.Fes - Categorie......: ObjectList Settings - Additional Info: Ver.Info - Description....: Object_open_via_NXRouter es wurde eine Exeption aus geloest wenn UGII_ROOT_DIR und ServerSettings.UGII_ROOT_DIR_SEARCH_P nicht gesetzt waren === 06.12.2009 ============================================================================ - Version........: 2.0554 // J.Fes - Categorie......: GUI - Additional Info: Ver.Info - Description....: eine nicht abgefangene Exception die beim arbeiten mit der interaktiven Application auftritt wird jetzt abgefanngen und eine Meldung im jeweis aktiven Info Fenster ausgegeben === 10.11.2009 ============================================================================ - Version........: 2.0550 // J.Fes - Categorie......: JobControl Scripting - Additional Info: Ver.Info - Description....: Scripting erweitert so das Customer Files dem Job hinzugefügt werden können Example: JobDef.JobFiles.JobCustomFiles.JobCustomFiles.Add(New JF.PlmJobManager.JobServer.JobManager_JobControlNextPaket_cls.JobFile_cls.JobCustomFileDef_cls(TEST, .cmd)) === 05.11.2009 ============================================================================ - Version........: 2.0549 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Description....: Objects select 'Bevor' 'After' werden jetzt vom JobContoler berücksichtigt === 02.11.2009 ============================================================================ - Version........: 2.0548 // J.Fes - Categorie......: Import - Additional Info: Ver.Info - Description....: table mapping umgestellt von: -select count(*) from -select top 1 * from === 02.11.2009 ============================================================================ - Version........: 2.0548 // J.Fes - Categorie......: Import Sites/Data Import Settings - Additional Info: UpdDb=Yes Check.Settings - Description....: in den SiteDef Connetion TimeOut Optionen ergänzt -DbConnectionTimeOut [default=60] -DbCommandTimeout [default=120] === 24.10.2009 ============================================================================ - Version........: 2.0545 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Description....: bei den JobRoules können jetzt via !NOT! Regel Computer ausgeschlossen werden. Example: via CName*!NOT!CName4CName2* Info: der !NOT! Part ist dominierend. === 21.10.2009 ============================================================================ - Version........: 2.0543 // J.Fes - Categorie......: JobControl Settings - Additional Info: UpdDb=Yes Check.Settings - Description....: in den JobRules kann jetzt festgelegt werden wie PFM Parts selectiert werden (PFM.Ignor,PFM.No,PFM.Only) === 16.10.2009 ============================================================================ - Version........: 2.0541 // J.Fes - Categorie......: GUI ObjectList - Additional Info: Ver.Info - Description....: in der Oberfläche kann jetzt auch über den PFM Namen gefiltert werden\diese ermöglicht alle Parts einer PFM auflisten zu lassen === 24.09.2009 ============================================================================ - Version........: 2.0538 // J.Fes - Categorie......: JobControl Settings - Additional Info: Ver.Info Check.Settings - Description....: SelObjectsBy_MaxComponents=0 SelObjectsBy_MinComponents=0 wird jetzt berücksichtigt JobControl Regeln prüfen bezüglich SelObjectsBy_MaxComponents SelObjectsBy_MinComponents === 17.09.2009 ============================================================================ - Version........: 2.0536 // J.Fes - Categorie......: JobControl Settings - Additional Info: Ver.Info - Description....: Dir_DataRoot_DP_91JobControl neu hinzugefügt in diese Verzeichniss sind JobControls Files abzulegen Einsatzbeispiel: Ablage von JobFiles die via JobServerScripte verarbeitet werden === 24.08.2009 ============================================================================ - Version........: 2.0534 // J.Fes - Categorie......: ObjectJobResults Settings - Additional Info: Ver.Info Check.Settings - Description....: (Scripts)Aus Generischen JobResult Files kann jetzt - an 5.ter Stelle angegeben werden ob das Ergebniss ein Warning hat (true or 1=has warning) (false or 0=no warning) === 24.08.2009 ============================================================================ - Version........: 2.0534 // J.Fes - Categorie......: ObjectJobResults Settings - Additional Info: Ver.Info Check.Settings - Description....: (Scripts)Aus Generischen JobResult Files kann jetzt\- an 6.ter Stelle ein JobLink mitgegeben werden === 24.08.2009 ============================================================================ - Version........: 2.0534 // J.Fes - Categorie......: DB Import - Additional Info: Ver.Info - Description....: Beim importieren der Daten aus TC in die JM.DB wird berücksichtigt das Import Item LastModify DateBegin nicht vor dem Start des Importbegins liegen darf. === 14.08.2009 ============================================================================ - Version........: 2.0532 // J.Fes - Categorie......: Install and Setup DB - Additional Info: UpdDb=Yes - Description....: Optimice DB ReOrg. Datenbank Maintain eingebaut Siehe Extras->Setup->Setup Database->Database Maintain->23 - Optimice DB (compress DB and Reorg. Indices via OSQL) === 12.08.2009 ============================================================================ - Version........: 2.0531 // J.Fes - Categorie......: Install and Setup - Additional Info: Ver.Info - Description....: neuer Schater Upgrade Database erstellt Siehe Extras->Setup->Setup Database->Database Setup->Database Upgrade Database === 12.08.2009 ============================================================================ - Version........: 2.0531 // J.Fes - Categorie......: Install and Setup DB - Additional Info: UpdDb=Yes - Description....: Optimice DB Indices in Datenbank Maintain eingebaut Siehe Extras->Setup->Setup Database->Database Maintain->22 - Optimice Index (Reorg. Indices via OSQL) === 21.07.2009 ============================================================================ - Version........: 2.0528 // J.Fes - Categorie......: DB Import Sites/Data Import - Additional Info: Ver.Info - Description....: Es wurde ein neuer Schalter für das testen der Verbindung zur TC DB erstellt === 17.07.2009 ============================================================================ - Version........: 2.0527 // J.Fes - Categorie......: Import Sites/Data Import Settings - Additional Info: Check.Settings - Description....: Sites/Data Import Ora.Bin jetzt für 32+64 bit version verwendbar Settings: wird im Feld Ora.Bin 'AUTO' eingegben so werden dem Suchpathd die Pfade der 32bit (..03-BinPublic\OraClient\32Bit) und 64bit (..03-BinPublic\OraClient\64Bit) DLL Verzeichnisse eingefügt. === 17.07.2009 ============================================================================ - Version........: 2.0527 // J.Fes - Categorie......: Install and Setup - Additional Info: Ver.Info - Description....: der installation für den SQL Server wurde der aktuelle Stand der Microsoft SqlSever Express 2005 (Service Pack 3) hinzugefügt Info: dieses kann für 32-Bit und 64-Bit installationen verwendet werden === 17.07.2009 ============================================================================ - Version........: 2.0527 // J.Fes - Categorie......: CommandLineArgs JobControl Settings - Additional Info: Check.Settings - Description....: die bezeichung der Optionsschalter JobContol* wurden berichtigt nach JobControl* /nbitte anpassen/n-/AutoStart JobContol:A --> /AutoStart JobControl:A n-/AutoStart JobContol:M --> /AutoStart JobControl:Mn-/AutoStart JobContol:R --> /AutoStart JobControl:R === 12.07.2009 ============================================================================ - Version........: 2.0526 // J.Fes - Categorie......: ObjectJobResults - Additional Info: UpdDb=Yes - Description....: Link zu ObjectJobResult eingefügt dieser Link wird genutzt um Verweise zu JobErgebnissen zu organiesieren (Bspl. MC-AC-Convert) Develoment Hint use: JobLog_lnkGen(Results_fp.FileDef.File_DPNE) === 12.07.2009 ============================================================================ - Version........: 2.0526 // J.Fes - Categorie......: ObjectJobResults - Additional Info: UpdDb=Yes - Description....: Ein ObjectJobErgebniss als Warning kennzeichnen wenn ein Job zu einem Objekt ein Warning hat dann kann dieser dem Object Job Ergebniss hinzugefügt werden (value=true/false) (Bspl. MC-AC-Convert) === 12.07.2009 ============================================================================ - Version........: 2.0526 // J.Fes - Categorie......: ObjectList - Additional Info: Ver.Info - Description....: suchen über Process Warnings in den Object Process Listen ergänzt === 12.07.2009 ============================================================================ - Version........: 2.0526 // J.Fes - Categorie......: ObjectList - Additional Info: Ver.Info - Description....: Job Links können über die Oberfläche geöffnet werden === 12.07.2009 ============================================================================ - Version........: 2.0526 // J.Fes - Categorie......: Settings - Additional Info: Ver.Info - Description....: Refile_MCS_Convert verhalten welche Logfiles geschrieben werden sollen kann eingestellt werden Siehe Settings -> Cat91_ExtendetSettingsOptional -> Refile_MCS_Convert_LogfilesCreateBehaver === 12.07.2009 ============================================================================ - Version........: 2.526 // J.Fes - Categorie......: ObjectList - Additional Info: Ver.Info - Description....: Job Links können über die Oberfläche geöffnet werden === 03.07.2009 ============================================================================ - Version........: 2.0525 // J.Fes - Categorie......: JobControl - Additional Info: UpdDb=Yes - Description....: selection der Komponenten kann jetzt auch über die APLevels ausgeführt werden Hierfür wurden folgende Felder erstellt: -SelObjectsBy_MaxApLevels -SelObjectsBy_MinApLevels === 02.07.2009 ============================================================================ - Version........: 2.0524 // J.Fes - Additional Info: Ver.Info - Description....: in der Dialogbox für das NX-Refile werden jetzt die gewählten Optionen nach dem drücken von OK korrekt übernommen === 24.06.2009 ============================================================================ - Version........: 2.0522 // J.Fes - Categorie......: Settings - Additional Info: Ver.Info Check.Settings - Description....: clear this inputfield to get the default === 24.06.2009 ============================================================================ - Version........: 2.0522 // J.Fes - Categorie......: Settings - Additional Info: Ver.Info Check.Settings - Description....: clear this inputfield to get the default === 21.06.2009 ============================================================================ - Version........: 2.0521 // J.Fes - Categorie......: Admin DB Import JobControl - Additional Info: Ver.Info - Description....: Extentet Replacment Variables -#TcSite.Id# -#TcSite.DBNetworkAlias# -#TcSite.DBProvider# -#TcSite.OracleBin# -#TcSite.OracleHome# -#TcSite.pName# -#TcSite.Tns_Admin# -#TcSite.UserName# -#TcSite.SiteAktive_bol# -#TcSite.pSite_ID# -#TcSite.pName# -#TcSite.ImportItemLastModifyDateBegin -#TcSite.ImportItemLastModifyDateEnd -#TcSite.NativeRoot_DP# -#TcSite.NativeMaskAp# -#TcSite.NativeFileSysUsing_bol# -#TcSite.NativeFileMaskExclude# -#TcSite.NativeFileMaskInclude# -#TcSite.SiteInfoWith_SiteId_and_pName# === 21.06.2009 ============================================================================ - Version........: 2.0521 // J.Fes - Categorie......: Admin DB Import JobControl - Additional Info: Ver.Info - Description....: Extentet Replacment Variables -#TcSite.Id# -#TcSite.DBNetworkAlias# -#TcSite.DBProvider# -#TcSite.OracleBin# -#TcSite.OracleHome# -#TcSite.pName# -#TcSite.Tns_Admin# -#TcSite.UserName# -#TcSite.SiteAktive_bol# -#TcSite.pSite_ID# -#TcSite.pName# -#TcSite.ImportItemLastModifyDateBegin -#TcSite.ImportItemLastModifyDateEnd -#TcSite.NativeRoot_DP# -#TcSite.NativeMaskAp# -#TcSite.NativeFileSysUsing_bol# -#TcSite.NativeFileMaskExclude# -#TcSite.NativeFileMaskInclude# -#TcSite.SiteInfoWith_SiteId_and_pName# === 18.06.2009 ============================================================================ - Version........: 2.0520 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Description....: Refile analysiert MC to AC konvertierung Ein Objekt bei dem ein Validation failed kommt wird das Objekt wie folgt gekennzeichnet: - .ProcessResultHasWarning = True - P.ResultMess: Rf.MC Convert Warning:[01]:[Validation failed after constraint conversion] Info: Analyse wird nur ausgefuehrt wenn der Refile mit Done und Error=0 durchgeführt wurde! === 18.06.2009 ============================================================================ - Version........: 2.0520 // J.Fes - Categorie......: JobControl - Additional Info: Ver.Info - Description....: Refile analysiert MC to AC konvertierung Ein Objekt bei dem ein Validation failed kommt wird das Objekt wie folgt gekennzeichnet: - .ProcessResultHasWarning = True - P.ResultMess: Rf.MC Convert Warning:[01]:[Validation failed after constraint conversion] Info: Analyse wird nur ausgefuehrt wenn der Refile mit Done und Error=0 durchgeführt wurde! === 16.06.2009 ============================================================================ - Version........: 2.0520 // J.Fes - Categorie......: DB - Additional Info: UpdDb=Yes - Description....: funktionen fuer die verwaltung des Updates der Datenbanken eingefuehrt verfügbare funktionen: - zzzzDbMaintain_valueGet - zzzzDbMaintain_valueSave === 29.04.2009 ============================================================================ - Version........: 2.0517 // J.Fes - Categorie......: JobControl TaskScheduler - Additional Info: Ver.Info - Description....: Extentet Replacment Variables: - #JobPlaner_ProcessStepControl# - #JobPlaner_TimeSchedule# - #JobPlaner_Name# - #JobPlaner_NameDescription# - #JobPlaner_Description# - #JobPlaner_Note# - #JobPlaner_Order# - #JobPlaner_ProcessLastMsg# - #JobPlaner_ProcessLastRunEnd# - #JobPlaner_ProcessLastRunStart# - #JobPlaner_ProcessObjectsProcStateCol# - #JobPlaner_ProcessState# - #JobPlaner_ProcessStepControl# - #JobPlaner_ProcessType# - #JobPlaner_ReDo# === 20.04.2009 ============================================================================ - Version........: 2.0512 // J.Fes - Additional Info: Ver.Info - Description....: :Bugfixder JobClient beendet sich nicht mehr, wenn der JobServer während der JobPaket generierung die Verbindung beendet! === 20.04.2009 ============================================================================ - Version........: 2.0512 // J.Fes - Categorie......: JobControl Settings - Additional Info: Check.Settings - Description....: JobServerGenNewJobTimeOut eingefuegt Info:Setzt die Timeoutzeit die der JobClient max wartet bis das der JobServer ein neuen Job erstellt hat === 14.04.2009 ============================================================================ - Version........: 2.0512 // J.Fes - Categorie......: ProcessGroups - Additional Info: Ver.Info - Description....: ueber die P.Gr kann jetzt gesteuert werden ob die UGMaster Objekte vor den UgNonMaster Objekten verarbeitet werden sollen., Hierdurch können die UGMaster Objekte vor den NonMaster Objekten verarbeitet werden! === 14.04.2009 ============================================================================ - Version........: 2.0512 // J.Fes - Categorie......: TaskScheduler - Additional Info: UpdDb=Yes - Description....: der Tabelle:'TaskScheduler_tbl' wurde das Feld:'ProcessStepControl' hinzugefügt === 14.04.2009 ============================================================================ - Version........: 2.0512 // J.Fes - Categorie......: Import ProcessGroups Refactoring - Additional Info: Ver.Info - Description....: JobServerObjectImportNewStatusSetTo ist jetzt als default=N, bei Bestandskunden (vor 14.04.2009) P.Gr.Editieren und Status der Objekte ändern von X auf N === 30.03.2009 ============================================================================ - Version........: 2.0506 // J.Fes - Categorie......: Scripting - Additional Info: Ver.Info - Description....: Versions Update QWhale_Editor_reg_1.54 === 13.03.2009 ============================================================================ - Version........: 2.0506 // J.Fes - Additional Info: Ver.Info - Description....: /IRIds_ObjectNames dient zur übergabe der IR's aus dem TCE heraus === 08.03.2009 ============================================================================ - Version........: 2.0505 // J.Fes - Categorie......: ObjectList - Additional Info: Ver.Info - Description....: Objekte können jetzt nach Assemply Levels gegiltert werden === 03.03.2009 ============================================================================ - Version........: 2.0505 // J.Fes - Categorie......: ObjectList - Additional Info: Ver.Info - Description....: Es kann jetzt nach Site und Remote Objects gelistet werden (R+S,S,R) === 24.02.2009 ============================================================================ - Version........: 2.0504 // J.Fes - Categorie......: ObjectList - Additional Info: UpdDb=Yes - Description....: Suchen ueber Last Result Optimiert === 16.02.2009 ============================================================================ - Version........: 2.0504 // J.Fes - Categorie......: DB Import - Additional Info: UpdDb=Yes - Description....: Beim importieren der Daten aus TC in die JM.DB wird automatisch das import Item LastModify DateBegin auf jüngste erfolgreich importierte IR gesetzt === 16.02.2009 ============================================================================ - Version........: 2.0504 // J.Fes - Categorie......: Import - Additional Info: Ver.Info - Description....: Default fuer Import Reconnet angepasst WaitTime=10Sec RetrysMax=3000 === 14.02.2009 ============================================================================ - Version........: 2.0504 // J.Fes - Categorie......: GUI - Additional Info: Ver.Info - Description....: ]es wird ein neues Logo in SplashScreen angezeigt Vorteil die Grafik ist einfacher Start bei Remote Umgebung besser === 23.01.2009 ============================================================================ - Version........: 2.0421 // J.Fes - Categorie......: GUI - Additional Info: Ver.Info - Description....: die Daten der Spalte [ProcessResultCode] werden in abhänikeit von ihrem Wert eingefärbt -Wert=0 Grün -Wert>0 Rot -Wert<=0 Orange -Wert=leer weiss === 11.12.2008 ============================================================================ - Version........: 2.0411 // J.Fes - Categorie......: Import Sites/Data Import - Additional Info: UpdDb=Yes - Description....: Abfrage für die ermittlung des RelaseStatus und Datums === 11.12.2008 ============================================================================ - Version........: 2.0411 // J.Fes - Categorie......: Import Sites/Data Import - Additional Info: UpdDb=Yes - Description....: UgPFM ermittlung realiesiert