ERROR {
1000 = "Input arg ERROR: Can't generate a bookmark because no web server is set up in the UG defaults file"
1010 = "Input arg ERROR: -force_update is not yet implemented"
1020 = "Input arg ERROR: No input file specified"
1030 = "Input arg ERROR(TCEng): Can't specify a .prt file with -pim=yes setting"
1040 = "Input arg ERROR(TCEng): Can only use -save_outside_iman with -pim=yes setting"
1045 = "Input arg ERROR: Can't use -nopopulate unless generating a bookmark or assembly jt"
1050 = "Input arg ERROR: Can't use -single_part and -nopopulate together"
1055 = "Input arg ERROR: Can't use -force_output_dir when generating a bookmark file"
1060 = "Input arg ERROR(TCEng): Can't use -force_output_dir when saving files back to TCEng"
1065 = "Input arg ERROR: You can not generate additional assembly jt or bookmark files when using -honour_structure"
1068 = "Input arg ERROR(TCEng): Can't use -include_empty and -update_ref_sets together"
1070 = "FATAL TCEng ERROR: Unable to connect to Teamcenter. Translation aborting...\nPlease check your login information and system settings."
1075 = "Input arg ERROR(TCEng): Couldn't derive UG/Manager file name from input file"
1080 = "None or invalid transforms detected in the listfile."
1085 = "Problem with input transform file"
1090 = "Attempt to use [listfile with transforms] without -transf_file option on commandline."
1095 = "Problem with input file"
1100 = "Input arg ERROR: The input given identified no parts or bookmarks"
1102 = "Input arg ERROR: Can only use -honour_structure with a specific .prt file"
1105 = "Input arg ERROR: Can only use -single_part with a specific .prt or .bkm file"
1110 = "Input arg ERROR: Can only use -generate_assy_jt with a specific .prt or .bkm file"
1115 = "Input arg ERROR: Can only use -generate_bookmark with a specific .prt or .bkm file"
1120 = "Failed to generated bookmark [%s], error [%d]: [%s]"
1125 = "Failed to generate assembly jt data for part [%s]: [%s]"
1130 = "Failed to locate file [%s] in output directory [%s], you might want to double-check."
1132 = "Unsuccessful in reevaluating reference sets, error [%d]: [%s]"
1135 = "Failed to generate jt data for part [%s] [%s]"
1140 = "Failed to load part: [%s]"
1141 = "Failed to load part: [%s], The specified file does not exist."
1145 = "Invalid filetype [%s]"
1150 = "Failed to load bookmark [%s]"
1160 = "Failed to create record in bookmark, error [%d]: [%s]"
1165 = "There were errors in the translation process ***. Translation of the following parts generated these messages:"
1170 = "Errors/Warnings for the part: [%s]"
1175 = "Error text: [%s], Error code: [%d]"
1200 = "Incompatible options selected ('-b' and export mode is PER_PART). Forcing export mode to MIMIC instead"
1205 = "Could not get current directory name"
1250 = "Serious error (code [%d]: [%s]) encountered during translation for component [%s]"
1255 = "Mismatched versions of ugtopv and the translator library."
1260 = "TCEng Error:Not generating an assembly jt file as the part is not an assembly"
1265 = "TCEng Error:Failed to find the correct reprev for [%s]. The assembly structure may not be up to date"
1300 = "JTtk License ERROR:Translator could not initialise the JTtk library. Please check you have the correct file."
1325 = "Failed to open part [%s], code:[%d] [%s]"
1400 = "Failed to get object attribute"
1405 = "UF_ATTR_cycle failure"
1425 = "Could not get the parasolid tag for bounding box calculation"
1430 = "Could not get BBox information, skipped BBox calculation"
1435 = "Surf output error"
1440 = "No b-spline surface created."
1445 = "Could not get structure of b-spline surface"
1450 = "Could not create Jtk face"
1455 = "Could not create Jtk loop"
1460 = "Could not create b-spline curve" 
1465 = "Could not create model space curve"
1470 = "There was an error creating the geometry for this object. Please check the part."
1475 = "Could not create uvCurve"
1480 = "Could not create xyzCv "
1485 = "Could not create b curve from the spcurve for hole."
1490 = "Could not create curve"
1500 = "Unknown annotation block type"
1502 = "Could not allocate any more space for GDT instance data."
1505 = "Invalid curve type for hatch[%d]"
1525 = "TCEng Error:Failed to import into TCEng item [%s] the file [%s] RefSetName [%s]"
1550 = "Failed to get face/point attribute"
1575 = "Error with object - no faces in list"
1600 = "[%s], line [%d]: [%s] returned error code [%d]"
1605 = "Load error for part [%s] - [%s]"
1610 = "Failed to update part [%s]"
1615 = "No part specified - please load a file."
1620 = "Part cannot be translated due to UG load error(s)."
1650 = "UGMGR_import_jt_file failed for [%s]"
1700 = "PK_ENTITY_ask_partition [%d]"
1705 = "PK_PARTITION_set_current [%d]"
1710 = "PSB_BODY_output_preprocess [%d]"
1715 = "PK_BODY_check [%d]"
1750 = "UF_UGPLMXML_ANN3D_export_handler() failed to create the plmxml document"
}
WARNING {
2000 = "TCEng Warning: Assembly JT name [%s] will be ignored since result is being saved in TCEng"
2005 = "Not generating bookmark because part isn't an assembly"
2010 = "Could not translate child [%s]: file not found, skipping [%d/%d]"
2015 = "Did not need to generate jt data for part [%s]"
2020 = "Failed to generate assembly jt data for part [%s] [%s]"
2025 = "Warning text: [%s], Warning code: [%d]"
2050 = "Component [%s] excluded -  referred to by the Empty reference set"
2055 = "Component [%s] was modified during load"
2060 = "No visible geometry found for part [%s]"
2065 = "(-b or -i) and APPLY TOP REFSET ARE INCOMPATIBLE OPTIONS.APPLY TOP REFSET WILL BE IGNORED"
2100 = "Unable to get the structure information for [%s]. Assuming there are no sub-solids"
2105 = "Not adding reference to geometry for [%s]: Component is hidden by a promotion"
2107 = "using ABSOLUTE path for inserting references to the files in the assembly."
2110 = "[%s] is not included in the model reference set and so is being excluded"
2115 = "Not adding reference to geometry for [%s]: Component is part of an excluded reference set"
2120 = "Not adding reference to geometry for [%s]: Component is on a filtered layer"
2150 = "Did not need to generate jt data for [%s]"
2155 = "Did not need to generate jt data. No visible geometry present"
2210 = "Could not get parasolid tag for the face [%d]"
2212 = "Could not get parasolid tag for the body [%d]"
2405 = "Could not get parasolid face tags for the ps body [%d]"
}
INFO {
3000 = "EXITING TRANSLATOR : Exiting this Translation Session !"
3100 = "Processing File: [%s]"
3105 = "Process-part returned NULL_TAG"
3110 = "Total time for translation was [%d] seconds"
3115 = "Received part [%s]..."
3120 = "Generated bookmark [%s]"
3125 = "Generated assembly jt file [%s]"
3130 = "Part [%s] already translated, skipping [%d/%d]"
3135 = "Processing part [%s]  Part No. [%d]  Elapsed Time [%.2f] min" 
3140 = "Processing part [%s], [%d/%d: [%d] sec remaining]"
3145 = "Processing part [%s], [%d/%d]"
3150 = "Processing part [%s]"
3155 = "Loaded part file in [%.2f] seconds"
3160 = "Updating structure for assembly part [%s]..."
3162 = "Reevaluated ref sets in [%.2f] seconds"
3165 = "Successfully generated jt data for part [%s] in [%.2f] seconds"
3170 = "Done with part [%s], unloading"
3175 = "Loading [%s] to [%s]..."
3180 = "Translation of [%d] component%s completed. All components translated successfully."
3185 = "Translation of [%d] component%s completed. [%d] components translated successfully and [%d] failures. [%s]"
3190 = "Translation of [%d] component%s completed. All components translated successfully but [%d] warning%s [%s] generated."
3415 = "Calculated assembly structure in [%5.2f] seconds"
3420 = "Exported assembly structure in [%5.2f] seconds"
3610 = "About to export data for component - mode is [%d]"
3615 = "TCEng Info:Assembly structure to import into TCEng" 
3845 = "Number of objects found for the component:[%d]"
3860 = "Creating part [%d] of [%d] part name = [%s]"
3865 = "Processing component: [%s] [%s]"
3870 = "File is already up to date... using the version stored in TCEng"
4175 = "Part Name = [%s]    Attribute Title = [%s]	Attribute Value = [%s]"
4305 = "TCEng Info:Importing [%s] into TCEng under name [%s]"
4310 = "TCEng Info:imported into TCEng item [%s], refSet [%s], the file [%s]"
4410 = "Upgrading pre-v10 parts (if any)..."
4420 = "Loading UG part file..."
4455 = "Generated UG/Mgr JT file identification [%s] for [%s]"
}
